ESP8266 5V 10A DC 7-30V Wireless WIFI Network Relay Module U8 Smart Home IOT

Description:

ESP8266 5V 10A DC 7-30V Wireless WIFI Network Relay Module Board U8 Smart Home

This WiFi relay module carries a ESP8266 WiFi module and micro controller.
It will send the serial port instructions to the cell phone APP and Implementation within the local area network (LAN) for wireless control relay.

 

 

The function and characteristics

1. Onboard ESP8266 wifi module,In AP mode, it can be connected by 5 clients at the same time;

2. Wifi relay module has two work modes:
(1)cell phones carry on the wifi module directly;
(2)cell phone and wifi module carry on the same router;

3. Transmission distance:
(1) In the open environment, the maximum transmission distance is 400m when the cell phone carry on the wifi module directly ;
(2) when the wifi module and cell phone carrying on the same router ,the transmission distance depend on the routers signal intensity;

4. Onboard 5v, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously;
Module with diode effusion protection, short response time;

The board function description:
IN ,IN-: 5V power input;
TX ,RX and GND: serial port debug pins;

Instructions:

1. Onboard the ESP8266 wifi module has three work modes: STA (client), AP (hot), STA AP( hot client), According to the work mode of wifi relay module to choose the corresponding mode of ESP8266 wifi module .

2. Module need configuration by serial debugging software and USB to TTL module send serial command , TX ,RX ,GND pin of USB to TTL module connect to RX ,TX ,GND pin of ESP8266 relay module,and IN ,IN- connect to DC5V power.

3. The default Baud rate of wifi module maybe is 115200 or 9600,you can send AT command change it,such as: AT CIOBAUD=115200. I recommend you use 115200 in general conditions, but you should change it to 9600 when you use cell phone control the relay(because the Baud rate of on board MCU STC15F104W is 9600).

Please note:

1. Wifi relay module needs to be reconfigured if restarted

2. ESP8266 wifi module has a timeout mechanism, when the cell phone haven’t sent commands to the ESP8266 wifi module over a period of time (default is 180s) , the ESP8266 wifi module will kick off your cell phone, you can send
AT CIPSTO = < time > on the PC to modify this time (time range 0-7200), such as: AT CIPSTO = 3600.

3. If it not return OK and just return what you have sent commands when you use USR-TCP232-Test-V1.3 configure the wifi module,you can press the ENTER before send commands

4. If it no response when you use USR-TCP232-Test-V1.3 configure the wifi module, maybe the baud rate is incorrect, You can try 115200 or 9600. but when you use cell phone control the relay, you must make sure the baud rate of wifi module is 9600(send AT CIOBAUD=9600 can change it), because the baud rate of onboard MCU(STC15F104W) is 9600

5.If you want to use a computer to control relay directly(baud rate is 9600), you can unplug the ESP8266 wifi module,and TX ,RX ,GND pin of USB to TTL module connect to TX ,RX ,GND pin of wifi relay module, IN and IN- connect to DC5V power. Send serial command (A00101A2 open relay; A00100A1 closed relay,command format must be hex) with serial debugging software on the PC to control the relay.

6.If the relay can’t open or close,maybe you need remove the R4, and use the USB to TTL module’s VCC pin connect to relay module’s 5V pin.

 

We strive to provide excellent customer service to all our customers. Your satisfaction is GUARANTEED at Makers Hut! We kindly ask you to contact us about any issues or praises you may have. Most issues can be addressed easily by our experienced team.

We look forward to your orders and comments. Thank you for shopping with us!

We accept the following payment methods:

Paypal
Bank transfer
Credit cards
Cash on collection
Credit account for Universities and Research Centres are subject to checks.

Shipping Policy
Our warehouse is located in Cardiff and we use Royal Mail economy services for posting small items. We use couriers for larger packages, or if you have selected 24 hour delivery during checkout.

We will ship all orders received before 2pm on the same working day between Monday to Friday. Please provide your phone number for the couriers. We will ship to your address specified on the checkout, please ensure correct shipping address is selected on your payment, as we are unable to change shipping address afterwards. 

Delivery Time
Most of our customers receive their orders within couple of days, please note we rely on economy services where the service is not guaranteed to arrive within this time, unless you select day definite delivery service. 

Collection
If you are in a rush to complete your project, you are welcome to collect your order. Our warehouse is located behind Starbucks on Newport road, Cardiff, CF23 9AE, all collections must be agreed prior as payment needs to be bank transfer or cash. 

If you are not entirely satisfied with your purchase, we're here to help.

Returns
You have 30 days to return an item from the date you received it.
To be eligible for a return, your item must be unused and in the same condition that you received it.
Your item must be in the original packaging.

Refunds
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on its status after inspecting the item.
If your return is approved, we will initiate a refund to your original method of payment.

Shipping costs
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non­refundable.
If you receive a refund, the cost of return shipping will be deducted from your refund.

Restocking fee
Orders under 2kg is subject to £1.90 and over 2kg is subject to £4 restocking fee.

Description errors and faulty items
We will swiftly arrange the return of the faulty item and send a replacement upon verification of the fault.