LN-BT02 Bluetooth 4.0 Audio Receiver Board Wireless Stereo Sound Module For Car
Popular
Product Introduction
Features:
1.Wide voltage conversion module Bluetooth 7v-30v with anti-reverse design allows DIY
friends without pressure.
2.Bluetooth module output op amp with NE5532 pre-amplified output signal amplitude,
promote common amplifier board without pressure.
3.audio signals with automatic switching function,
can guarantee the original amplifier or powered speakers to increase functional status
under the Bluetooth function, the implementation of lossless conversion.
4.using picture-board design, up to 4 shelves full effect SMT precision industrial processing.
5.then the power output of the output signal can work automatically, Bluetooth priority.
6.Power :7-30v wide voltage operation.
7.PCB board size: 50x60MM
8.stereo reception
9.or 4.0 Bluetooth V2.0/3.0
10.effective transmission distance: about 10 meters,
"about the real differences between specific environmental obstacles."
11.can not be directly connected to speakers.
12.can be an external Bluetooth antenna.
External buttons can be accessed by you can not answer "
Note: Bluetooth antenna and keys at once welding welding does not give return or exchange."
13.Bluetooth receiver board that not all computers can be paired with
Wiring and instructions steps:
1.wide voltage operating range, with anti receiver design, DIY worry! 7-30VDC power supply
2.automatic power work, then the receiver a blinking blue light,
good if a direct connection can be automatically connected
3.Open the phone or other Bluetooth devices such as laptops, tablet computers,
mobile phone as an example: open its Bluetooth function,
the phone will automatically search, automatic pairing with its modules,
most mobile phones do not need to enter the key,
the individual parts of the phone such as Nokia 0000 need to enter key
will display the module name M-DIY is connected on the phone after the connection is successful,
4.audio input module audio output jacks audio equipment,
or access to the audio input amplifier board, and you're done!
Enjoy your own DIY wireless amplifier it! !Input interface can be connected to another source,
when the Bluetooth stops working,it will automatically switch to another source
5.after the pairing is successful, the function keys on the module, down song,
and volume addition and subtraction, pause can use!
Package include:
1 x Bluetooth 4.0 Audio Receiver Board with Connect cable
1.Wide voltage conversion module Bluetooth 7v-30v with anti-reverse design allows DIY
friends without pressure.
2.Bluetooth module output op amp with NE5532 pre-amplified output signal amplitude,
promote common amplifier board without pressure.
3.audio signals with automatic switching function,
can guarantee the original amplifier or powered speakers to increase functional status
under the Bluetooth function, the implementation of lossless conversion.
4.using picture-board design, up to 4 shelves full effect SMT precision industrial processing.
5.then the power output of the output signal can work automatically, Bluetooth priority.
6.Power :7-30v wide voltage operation.
7.PCB board size: 50x60MM
8.stereo reception
9.or 4.0 Bluetooth V2.0/3.0
10.effective transmission distance: about 10 meters,
"about the real differences between specific environmental obstacles."
11.can not be directly connected to speakers.
12.can be an external Bluetooth antenna.
External buttons can be accessed by you can not answer "
Note: Bluetooth antenna and keys at once welding welding does not give return or exchange."
13.Bluetooth receiver board that not all computers can be paired with
Wiring and instructions steps:
1.wide voltage operating range, with anti receiver design, DIY worry! 7-30VDC power supply
2.automatic power work, then the receiver a blinking blue light,
good if a direct connection can be automatically connected
3.Open the phone or other Bluetooth devices such as laptops, tablet computers,
mobile phone as an example: open its Bluetooth function,
the phone will automatically search, automatic pairing with its modules,
most mobile phones do not need to enter the key,
the individual parts of the phone such as Nokia 0000 need to enter key
will display the module name M-DIY is connected on the phone after the connection is successful,
4.audio input module audio output jacks audio equipment,
or access to the audio input amplifier board, and you're done!
Enjoy your own DIY wireless amplifier it! !Input interface can be connected to another source,
when the Bluetooth stops working,it will automatically switch to another source
5.after the pairing is successful, the function keys on the module, down song,
and volume addition and subtraction, pause can use!
Package include:
1 x Bluetooth 4.0 Audio Receiver Board with Connect cable
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.