SATA to USB 2.0 (5 Cables)
Description:
A must have tool kit for data transfer, backup and cloning
Turn any SATA/IDE drive into a convenient external drive, could be used as a bridge to connect SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface
Hi-Speed USB interface provides for easy installation with its plug and play design
Light weight, lowest cost mobile storage solution
Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive
Connect your SATA / IDE device to your computer through a USB port
Compliant with USB 1.1 and 2.0 standards
USB 2.0 interface for 480 Mbps high speed data transfer
Supports SATA Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices
Plug-and-play
AC power can be used world widely with input voltage AC 100v - 240v / 50 - 60Hz
Supports Windows ME/2000/XP/Mac OS 8.6 or Latest version
Plug Type: US
Net weight: 225g
Package weight: 229g
Package Included:
1PC*USB to IDE / SATA cable adapter
1PC*SATA Data cable
1PC*AC adapter
1PC*AC to IDE power converter
1PC*IDE to SATA power cable
A must have tool kit for data transfer, backup and cloning
Turn any SATA/IDE drive into a convenient external drive, could be used as a bridge to connect SATA HDD, 2.5" hard disk, 3.5" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to computer with USB 2.0 interface
Hi-Speed USB interface provides for easy installation with its plug and play design
Light weight, lowest cost mobile storage solution
Use your 2.5" / 3.5" IDE hard drive or SATA hard disk as an additional external hard drive
Connect your SATA / IDE device to your computer through a USB port
Compliant with USB 1.1 and 2.0 standards
USB 2.0 interface for 480 Mbps high speed data transfer
Supports SATA Hard drive, 2.5" laptop hard drives, 3.5" desktop hard drives, CD-ROM, DVD-ROM, CD-RW, DVD-RW Combo devices
Plug-and-play
AC power can be used world widely with input voltage AC 100v - 240v / 50 - 60Hz
Supports Windows ME/2000/XP/Mac OS 8.6 or Latest version
Plug Type: US
Net weight: 225g
Package weight: 229g
Package Included:
1PC*USB to IDE / SATA cable adapter
1PC*SATA Data cable
1PC*AC adapter
1PC*AC to IDE power converter
1PC*IDE to SATA power cable
SATA to USB 2.0 (3 Cables)
Features:
The USB interface connected to the 2.5 and 3.5 inch IDE and SATA hard disk interface
USB2.0 TO IDE/SATA high-speed connection
USB2.0 high speed transmission, stable performance
Support CR cd-rom, DVD, cd-rom, CD - RW, DVD RW
Support system: Windows 2000, me, XP, Vista and Mac OS
Under Windows 2000 / ME/XP/Vista, don't need The drive
* the solidification structure, stable performance
* USB transfer IDE/SATA conversion line
* conversion head integration 2.5 inch, 3.5 inch and 5.25 inch, type hard disk (below 320 g), cd-rom (The recorder)
* support hot plug, plug and play
* can be used in hard disk, cd-rom, Campbell, MO, ZIP transfer thereof
* good compatibility, can realize data exchange across the hardware platform
* transfer rate quickly, the transfer rate of up to 480 MB/s
Specifications:
USB Cable Length: 62cm/24.41in.
4 Pin power cable Length: 17.5cm/6.89in.
SATA cable Length: 36cm/14.17in.
Using Information:
1. Place the hard disk (add hard disk box) of the jumper wire to the disc (MASTER) mode Before using.
(there is no power cord and other accessories)
2. the connection order
(1) first connect the power cord line to 220v mains.
(2) connect the power adapter to the power cord end (so as not to spark phenomenon caused by the electric current is too large, a few may be burned power adapter).
(3) connect the USB cable to your PC, and power on the hard disk box, can exchange data after the computer identify USB device a few minutes later.
C. hard disk box removal
Remove the Hard disk box as the way of USB device removal, and then pull out the hard disk box.
Notice:
The power adapter belongs to High heating equipment, please pay attention to keep good heat dissipation. Please remove the ac adapter, If you do not use it. Do not connect it with the wiring board, so as not to accelerate the ageing of the electronic components and lower the service life of the product. Summer arriving, the weather is hot, don't use hard disk box or drive line time for a long time, it is easy to burn in such hot weather.
Package Included:
1 x USB 2.0 to IDE SATA Adaptor Cable
1 x 4 Pin power cable
1 x SATA cable
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.