- Type: 5/8"*3/4" NSF61 Certified, Lead-Free Potable Water Meter, 3/4" NPT Couplings at both ends, with Pulse Pulse/Reed Switch Output, Multi-Jet
- Model: DAE MJ-75, factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
- Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
- Wireless remote reading available (3rd picture) with DAE WSC500 RF converters (www.ebay.com/itm/163080739313).
- If you are interested in cloud metering or wireless management or looking for a large quantity, please contact us.
- Ready for use with CO-10 (Electronic Pulse Counter, www.ebay.com/itm/162563660348) or CO-10 KIT (www.ebay.com/itm/163764295809) - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (www.ebay.com/itm/162662019120 , Auto Meter Reading Module for single water meter) and AMR (www.ebay.com/itm/162592668243 , for 16 water meters) for remote reading (5th picture). CO-10 or AMR130 will be purchased separately. Conforms to both AWWA C700 and ISO 4064 Class C. for City water only.
- Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE PD-75 (www.ebay.com/itm/164300202566), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75.
- Unit: US Gallon
- Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard
- Pulse Output: 1 gallon/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE.
- Meter body: Lead-Free Brass
- Length without couplings: 7.5 inches, Length with couplings: 11.5 inches
- Item dimension: 7.5 inch length, 3.7 inch wide, 4.23 inch height. Weight: 3 lbs 10 once.
- NSF61 Certified Lead Free Couplings Included
- Max. Reading:9,999,999 gallons, Min.Reading:0.005 gallons, The 1st digit from the right has a multiplier of 100 gallons. For example, if you see 01234 on the digits, it is 123400 gallons. The 1st dial under the digits has a multiplier of 10 gallons. The 2nd dial under the digits is in gallon. Reading on the 4th picture of the listing is 94.00 gallons.
- AMR or AMR130 will collect data from water meters and send them to remote host through Modbus RTU/RS485 with third party software.
- Only two wire connection between water meter and AMR or AMR130. It is not required for additional power source.
- Max temperature: 122F (50C)
- Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by California, Vermont, Maryland, Louisiana state laws and the US Safe Drinking Water Act.
- Conforms to AWWA and ISO 4064, for clean water only
- Safe Maximum Flow Rate: 20 GPM,
- Recommended Maximum Continuous Flow Rate: 10 GPM,
- Minimum Test Flow Rate: 0.25 GPM
- Normal Test Flow Limits: 1-20 GPM
- For irrigation, please choose water meter based on normal flow rate or Maximum Continuous Flow Rate, not the piping size. As a rule of thumb, if having a ¾” or ½” piping with the irrigation system, you should choose 1” water meter or bigger, and 1.5” water meter or bigger for 1” piping. Remove water meter before winterization.
- Pressure drop: 0.580 psi @ 5 GPM, 2.750 psi @ 10 GPM
- DAE 5/8"*3/4" meter is not a meter with a 5/8" inlet and a 3/4" outlet. It is with 3/4" NPT couplings for both 3/4" inlet and 3/4" outlet.
- The max. working pressure is 232 psi, exceeding the requirement from AWWA standard 150 psi.
- Bore diameter: 0.88 inch (22.3mm)
- 2 years warranty from the seller.
- For the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.