Quantity |
2x 12mm + 2x 15mm + 20 Extended Bolts |
Torque Specs |
M14: 140NM; M12: 113NM |
Vehicle Bolt Pattern(PCD) |
5x112 MM |
Hub Centric | Yes |
Wheel Bolt Pattern(PCD) |
5x112 MM |
Material |
Forged Billet 6061-T6 Aluminum |
Spacer Thickness |
Fron 12MM + Rear 15MM |
Minimum Number of turns for Bolts/Nuts |
7.5 Turns / 6.5 Turns |
Hub Center Bore |
66.5MM / 66.45MM |
Fit Models |
Audi / Mercedes Benz |
Thread Pitch |
M14x1.5 / M12x1.5 |
Color Choice |
Black Anodized |
Bolts Grade |
12.9 Grade Tested |
Brand |
BLOXSPORT |
|
|
The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. |
Sample of wheel studs 12.9 grade has been tested by according to Test method: ISO898-1:2013, Cor.1:2013, on 08 December 2015, report No. GZIN1512051950ML. Report is available on request and can be validated by . .
Professional Data Measurement | + | CNC Machined |
The consummate data comes from constant practice, BLOXSPORT always make perfection more perfect. |
+ | The wheel spacers were modern CNC machined, Accurate to 0.02mm Machining precision. The surface was more smooth, increasing car driving more stable and more secure and no vibration.
|
+ |
|
@ Black color hard anodized is more beautiful and luxuious, anti-rust.
Before you buy, please confirm that this is the thickness you need. If you not sure which thickness
you can install for your car, please use the measuring device to measure from the inside of the
straight edge to the inner fender lip as below showing.
We are the Manufacturer, Welcome to Contact us for OEM Customized Service
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).