Range Rover Evoque Seat Risers

Increase your driver / passenger seat height

We Ship Worldwide.

We have shipped to:  France, Sweden, Spain, Germany, Argentina, Cyprus, USA, Colombia

and many more countries.

Having purchased a Range Rover Evoque in October of last year i thought the drive height was a little low.

After speaking to many Evoque Owners - i found they had the same complaint.

So i manufactured these spacers 


Seat Risers are supplied with longer screws and washers as per photo.

These Seat Risers are High Grade Steel and Chemically Blacked to blend in with Seat Rails

Photo shows them before Chemical Blacking has been added


These Risers will fit either the Driver Seat or Passenger Seat - or Both !

Why not buy 2 sets - one for each side - and save a few pennies!

1 Set of 4 Spacers per seat.


These will fit all Evoque Models 2011 - 2019 and will fit both Manual and Electric Seats.


Simply remove all 4 screws holding seat down to the floor using E12 torx drive socket.

Lift the seat and place the first 2 spacers to the rear of the seat, and then the second 2 spacers to the front underneath the rails.

Place new longer screw with washer through rail and spacer and lock down tight with 17mm A/F Hexagon Socket.

Full Instructions Supplied With Kit


They will fit all models 2011-2020


The Spacers are 30mm in height - which may not sound a great deal but increases the drive height considerably.

Simple To Fit - Takes about 10 minutes per seat.


Parts are fitted at your own discretion and without liability.


Any questions - Please ask.