You are purchasing two RV trailer Truck car graphics
FEATURES
All graphics will arrive on backing sheets with clear PVC transfer tape for easy decal placement.
This sale includes one set of right and left side graphics.
Measurements: All dimensions are listed in the drop down menu. (Measurement is at the thickest point of the decal.) Please message us if you would like alternate sizes.
Colors: Please message us your three color choices from the color chart and which set of graphics you would like what color (from color chart) in order details at the time of checkout or we will ship the default colors (as pictured) from the drop down menu you selected.
Graphics can be applied to any flat non-porous surface.
We use original equipment grade materials in making our graphics so you receive an exceptional product. All graphics are printed on high quality Air-release bubble free outdoor self-adhesive 2.5 mil vinyl wrap and UV laminated. Excellent UV , temperature, humidity, salt spray resistance. Gloss finish. If properly installed graphics may last up to 7 years.
(Note: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.)
MATERIALS NEEDED
Small cutting knife or razor blade (an Exacto Knife is ideal for the job)
Masking tape
Lint free dry cloth
Plastic Squeegee
SURFACE PREP
Warning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.
Saturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.
Temperatures of 50º to 90º F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.
APPLICATION
(Note: Graphics can only be applied using the dry method)
Step 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.
Step 2: When it’s positioned correctly, apply a hinge using Main Blue painter’s tape or something similar, to affix the graphic in place (from the center).
Your hinge should secure the vinyl and liner to the substrate.
Step 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.
Peel the masked vinyl and lay it back down on the other half of the graphic.
Step 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.
Take a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause ‘bubbles” under your print.
Step 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.
Work from the center hinge outward.
Step 6: Then lift the other half, remove the remaining release liner and repeat the process.
When both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.
Allow some time for the adhesive bond to form. And you are finished.
PAYMENT
We accept payment by PayPal.
Immediate payment is required.
For customers in Michigan(MI), applicable 6% sales tax will be applied during checkout.
SHIPPING
We ship within 1 business day, orders on Saturday/Sunday will be shipped on Monday.
All orders will be shipped USPS priority mail with Tracking
We only ship to confirmed addresses
Please make sure you provide the correct address we will not refund for incorrect address at the time of purchase
Please contact us for international shipping
RETURNS
Buyer pays return shipping on all orders
We do not except returns on international orders
Our customer support team is available through eBay messages only
Please ask all questions prior to purchasing