Key Features:

Use this HD Bluetooth music receiver instead of buying a brand new Bluetooth sound bar; turn your older stereo into a nifty Bluetooth capable one

 

Sound quality with LDAC & aptX HD though better than from SBC codec so aptX Bluetooth is far superior to standard Bluetooth

 

aptX Low Latency codec ensuring synchronized audio during video playback

 

Setup is extremely easy. Once plugged in, the device automatically makes itself available to be paired. No password or key required

Easy to Use, Plug & Play: No Driver Installation Needed

 

Compatible with all DSPs, standalone DACs, amplifiers, preamplifiers, power amplifier, A/V receiver and PA speakers

 

This one offer three useful outputs – analogue RCA (instead of lower quality headphone jack), digital optical and digital coaxial - all work in parallel so one Bluetooth input can be distributed to three amps/DACs at the same time

 

The use of a dedicated digital-analogue-converter (instead of the cheap integrated DAC of the Bluetooth chipset) enables audiophile grade sound output at the analog RCA jacks

 

Auto-reconnect to last paired device during power-up, remembers up to 5 devices at once

 

It runs stone cold, not surprising since Bluetooth uses very much less power than Wi-Fi

 

Specifications: 

Bluetooth Profile: Bluetooth 5.1 + EDR with A2DP, CLASS 1

 

Built-in 32Bits DAC: TI/ Burr-Brown PCM5102A

 

Reception Distance: 100 feet line of sight

 

Audio Input: Bluetooth ONLY

 

Audio Outputs: analog L/R RCA, digital TOSLINK optical and digital S/PDIF coaxial

 

Power Input: USB 5V DC (0.2A-3.0A) power supply excluded, USB power cable included

 

Supported Audio Codecs: LDAC, aptX, aptX Low Latency, aptX HD, SBC, AAC, MP3, FLAC, DSD

 

Number of devices in pairing memory: 5

 

FAQ:

Does the power supply adapter come in the box, if not what kind of power input is needed?

No, it does not come in the box as most of us probably have an extra power supply lying around.

Any 5V DC USB charger (current range: 0.2A~3.0A) is fine for BluDento.

Is this version also a Bluetooth audio transmitter?

This is simply a Bluetooth receiver!

 

Is it possible to rename the Bluetooth ID if two devices are used in adjacent rooms?

Unlike most other Bluetooth receivers, we offer the possibility to customize your Bluetooth ID to anything you want!

Please just make sure that when you place your order you clearly state your preferred ID in the order notes.

Once the package leaves our factory you will not be able to change it.

 

Can you have two identical hi-fi Bluetooth music audio receiver in one household?

Sure, you can. It will not interfere with each other during playback.

Unlike most other Bluetooth receivers, we offer the possibility to customize your Bluetooth ID to anything you want!

Please just make sure that when you place your order you clearly state your preferred ID in the order notes.

Once the package leaves our factory you will not be able to change it.

What if your amp has a DAC, do you need the Bluetooth DAC?

This is primarily a Bluetooth receiver but also does a pretty good job as DAC. If you already have a DAC this only makes sense if you would like to stream your music wirelessly. If you use the optical and coaxial outs, it will bypass the internal DAC.

 

Does it have an on/off button or auto-on when power is connected?

No buttons: the Bluetooth is always on when the unit is powered on and it doesn’t go to sleep;

No controls (volume, play/pause, prev/next): you can just change it and adjust volume or pause from your phone without running over to the stereo.

 

How many Bluetooth devices can simultaneously stream to this device?

ONLY 1 device.

How to Pair 2 Phones ?

1. Power on BluDento Bluetooth receiver;

2. Enable Bluetooth on the 1st phone, search and connect to “BLT-HD”;

3. After pairing successfully, disable Bluetooth on the 1st phone. BluDento will enter pairing mode again;

4. Pair BluDento to the 2nd phone by the same way;

5. After pairing successfully, enable Bluetooth on the 1st phone, click to connect “BLT-HD” again;

6. Now both 2 phones are connected to BluDento.

Note: Only 1 phone can play at the same time, you have to pause the other.

 

Can a 3.5mm aux plug into this?

Yes, a stereo RCA to 3.5mm adapter is included

What are the accessories?

USB to micro USB power cable – 40 inch

RCA cable – 30 inch

RCA to 3.5mm adapter – 6 inch

Optical cable – 30 inch

How to turn it off?

Turn Bluetooth off on local device when not using;

Unplug the power.

I have multiple phones/tablets/laptops. I can't tell which is currently connected to the device. How can I force-pair the one I have in my hand?

Do it manually.

You must disconnect from your previous connected device to connect to a new one.

 

Shortcomings:

There is no ON/OFF power switch;

Not a Bluetooth transmitter;

No USB power adaptor.