Quantity |
2 Spacers for 2 Wheels |
Torque Specs |
140NM / 113NM |
Vehicle Bolt Pattern |
5x112 MM |
Hub Centric | Yes |
Wheel Bolt Pattern |
5x112 MM |
Material |
Forged 6061-T6 Aluminum |
Thickness |
5MM / 1/5" inch |
Minimum Number of turns for Bolts/Nuts |
7.5 Turns / 6.5 Turns |
Center Bore |
66.5 MM |
Fit Models |
Mercedes/Audi |
Thread Pitch |
Without Bolts |
Color Choice |
Black Anodized |
Bolt Grade |
Without Bolts |
Brand |
BLOXSPORT |
Please check the following compatible models for this item:
A Class A160 A180 A190 A200 A250 A45 AMG W168 W169 W176
AMG GT GTC GTR GTS
B Class B180 B200 B250 B250e W245 W246
C Class C180 C200 C220 C230 C240 C250 C280 C300 C320 C350 C350e C400 C450 / C36 C43 C32 C55 C65 AMG W202 W203 W204 W205
CL Class CL200 CL230 CL500 CL550 CL600 / CL55 CL63 CL65 AMG C140 C215 C216
CLA Class CLA180 CLA200 CLA250 CLA45 AMG C117
CLK Class CLK280 CLK320 CLK350 CLK430 CLK500 CLK550 / CLK55 CLK63 AMG C208 C209
CLS Class CLS350 CLS400 CLS500 CLS550 CLS63 AMG C218 C219
E Class E200 E250 E280 E300 E320 E350 E400 E420 E430 E500 E550 / E43 E55 E63 AMG W124 W210 W211 W212
GL Class GL320 GL350 GL450 GL500 GL550 GL63 AMG X164 X166
GLA Class GLA180 GLA200 GLA250 GLA45 AMG X156
GLC Class GLC250 GLC300 GLC63 GLC43 AMG X253
GLE Class GLE300d GLE350 GLE350d GLE400 GLE500 GLE500 GLE500e GLE450 GLE43 GLE63 AMG W166
GLK Class GLK250 GLK280 GLK300 GLK350 X204
GLS Class GLS350d GLS450 GLS550 GLS63 AMG X166
M Class ML250 ML320 ML350 ML400 ML430 ML450 ML500 ML550 ML55 AMG ML63 AMG W163 W164 W166
R Class R320 R350 R500 R550 R63 AMG W251
S Class S320 S350 S400 S400L S420 S430 S450 S500 S550 S550e S600 / S55 S63 S65 S65L AMG W116 W126 W140 W220 W221 W222
SL Class SL320 SL400 SL450 SL500 SL550 SL600 / SL55 SL60 SL63 AMG R107 R129 R230 R231
SLC Class SLC180 SLC200 SLC300 SLC43 AMG R172
SLK Class SLK200 SLK230 SLK250 SLK280 SLK300 SLK320 SLK350 / SLK32 SLK55 AMG R170 R171 R172
SLR Class SLR McLaren R199
SLS SLS AMG C197
>> Hub Centric Design--NO VIBRATION
However, with a non-hubcentric wheel spacer, the weight of the car is no longer on the locating ring and is now on the studs, it more easily cause vibrations from the wheels, and studs bear all weight of the car. That doesn't mean you can't choose non-hubcentric wheel spacer, but just confirm the studs are in good quality.
5 years warranty -- Forged Aluminum 6061-T6
As the picture show you, The casting material made wheel spacers performance is too bad, easily being snapped off and pose a very serious threat to the driving safety. BLOXSPORT insist on using the forged material, insist on the conception of putting safety in the first place and reject to use the casting material.
Forged parts had a 26% higher tensile strength than the cast parts. This means you can have stronger shackles at a lower part weight.
Forged parts have a 37% higher fatigue strength resulting in a factor of six longer fatigue life. This means that a forged shackle is going to last longer.
>> Modern CNC Machined + Hard Anodized Surface + Professional Measurement
The
wheel spacers were modern CNC machined, the surface was more
smooth, increasing car driving more stable and more secure and no
vibration. 0.02mm Machining precision, the consummate data comes
from constant practice, BLOXSPORT always make perfection more
perfect.
How Thick Should your car fit?
Before you buy, please confirm that this is the thickness you
need. If you not sure which thickness you can install for your car,
please use the measuring device to measure from the inside of the
straight edge to the inner fender lip as below showing.
Item Benefits:
Product effect:
>> Factory Shows
BLOXSPORT have been specializing in manufacturing the wheel parts for 8 years. We supply wheel nuts/bolts(Locking/Classic...), wheel spacers(3mm-120mm, 1" inch etc.), custom wheel adapters 5 lug to 5 lug; 4 lug to 4 lug; 5 lug to 6 lug;6 lug to 8 lug... We refuse to use the wheel spacer made of casting aluminum and the bad quality bolt/stud, lug nut. We insist in using the forged aluminum alloy and high quality bolt/stud,lug nut(passed the 1 Million times Fatigue Test,etc.).
We always insist on four concept respectively:
1.insistence on the service philosophy that safty is No.1 and creating the value for our customers.
2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability.
3. insistence on the test from the third party.
4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers).