Product Introduction
Black Metal Detector with Battery Box
DIY Kit Metal Detector Kit Electronic Kit DC 3V-5V 60mm Non-contact Sensor Board Module DIY Electronic Part Metal Detector
Component list
NO |
Name(EN) |
Format |
Quantity |
R1 |
Color ring resistance |
200K |
1 |
R2 |
Color ring resistance |
2K |
1 |
R3 |
Color ring resistance |
470R |
1 |
VR1 |
Adjustable resistance |
100R |
1 |
C1、C4 |
Ceramic capacitors |
104P |
2 |
C2、C3 |
Ceramic capacitors |
222P |
2 |
C5 |
Electrolytic capacitor |
100μF |
1 |
Q1 |
Transistor |
S9018 |
1 |
Q2、Q3 |
Transistor |
S9012 |
2 |
LED1 |
LED |
5mm |
1 |
SW1 |
Switch |
6P self-locking |
1 |
SP2 |
buzzer |
HSD9*12 |
1 |
Power on |
USB male |
- |
1 |
—— |
PCB |
- |
1 |
Working voltage: 3~5V
PCB size: 92 × 60mm
Product weight: 17g
Precautions:
1Compared with the list of components and the number and specifications of identification components
2 Check the resistance of all resistors with a multimeter
3 Confirm the component polarity and the mounting direction on the board in advance.
About debugging:
The machine is powered by 3 to 5V DC power. Turn on the power and turn on the power switch. At this time, the buzzer will sound.
The LED is bright, slowly adjust the VR1 potentiometer, so that the buzzer just does not ring. To adjust the potentiometer to affect the detection distance, the detection distance of the machine is less than 6 cm, affected by the size of the detected object and the environment.
Tools required for assembly testing:
Electric iron, solder wire, universal meter, tweezers, diagonal pliers, charging treasure
Schematic
Installation tutorial
Debugging method
Green Metal Detector DIY Kit
NO. |
Parameter |
Value |
1 |
Name |
Metal Detector |
2 |
Operating Voltage |
DC 3-5V |
3 |
Operating Current |
40mA |
4 |
Standby Current |
5mA |
5 |
Detection Distance |
60mm |
6 |
Alarm mode |
Sound/Light |
7 |
Difficulty |
Easy |
8 |
PCB Size |
86*61mm |
NO. |
Parameter |
Value |
NO. |
Component Name |
PCB Marker |
Parameter |
QTY |
1 |
Metal Film Resistor |
R3 |
470ohm |
1 |
2 |
Metal Film Resistor |
R2 |
2K |
1 |
3 |
Metal Film Resistor |
R1 |
200K |
1 |
4 |
Potentiometer |
VR1 |
100R |
1 |
5 |
Ceramic Capacitor |
C2,C3 |
0.022uf |
2 |
6 |
Ceramic Capacitor |
C1,C4 |
0.1uf |
2 |
7 |
Electrolytic Capacitor |
C5 |
100uf |
1 |
8 |
Red LED |
LED1 |
5mm |
1 |
9 |
S9012 |
Q2.Q3 |
TO-92 |
2 |
10 |
S9018 |
Q1 |
TO-92 |
1 |
11 |
Power Switch |
SW1 |
6*5mm |
1 |
12 |
Buzzer |
SP1 |
9*12mm |
1 |
13 |
Power Socket |
J1 |
KF301-2P |
1 |
14 |
PCB |
|
MDS-60 |
1 |