35L/240V/2400W ALCOENGINE POT STILL DISTILLING KIT

Product Information

• This pot still design has been created to allow the delicate compounds that form the complex structure of many whiskeys and gins. This iconic vee shape still has been created to capture the vital esters, aldehydes and phenolic compounds that are necessary to give the final spirit a complexity that simply cannot be created any other way.
• It come with a solid copper condensor and a 35L digi boiler and a stainless steel lid to adapt the condensor. An option of stainless steel sieve plate may give to you for free if you contact seller after you pay.
• The whole system is designed to save, time, money and parts, and fit in one box for easier storage and cheaper shipping.
• A pure pot still is used when you want the flavour of the wash to come through. For instance, if you ferment fruit or grains, it will allow some of that flavour to enter your distillate. If you use a reflux still, you would just end up with pure, unflavoured vodka. Inject some flavour into your drinks with the Alcoengine Distilling Pot Still!
• Fast – 4.5L/hr with alcohol or 2.8L/hr with water
• With an all copper construction for smoothness of taste it comes with a digital thermometer and is simple to use.
• Just switch it on and collect your alcohol – it couldn’t be simpler than that!
• No more stuffing around with water flow speed!
• Some stills are hard to opperate and require fine tuning of the water flow in the condenser. This Alcoengine Design on the other hand just requires a minimum water flow rate and thats it. So the as long as you have enough coolent it doesnt matter how fast your coolent flows through the still. This makes the still far easier to opperate than many other brands.
• Easiest Still to Use - That's our guarantee
• This bulletproof design is so easy to use that we are giving you a guarantee that you will get great spirit in no time flat. All you need to do is make sure you have adequate water/coolent flowing through the head and just about eventhing else will look after itself.
• Compatible with Many Boilers
• This still design is compatible with many boiler types. One option is just get a pot and drill a 47mm hole in the lid and this still will fit no worries. The still also fits many standard boilers such as the standard Turbo Boilers, Robobrew, and we have been told by our customers that it also works with the Grainfather . This still can also fit the top of stainless steel kegs too. So you can easily make your own keg boiler. You can use a 2inch tri-clover clamp (not included) and then use the clamp to attach this still to the top of a 50L keg. So you will not find a more compatible still design that fits a wide range of boiler types. This can do it all.
• Solid Copper
• Unlike stainless steel stills and stills that are only copper plated, this still is made from solid copper. When your hot spirit comes in contact with copper the copper acts like a catalytic converter and drives sulfur out of the spirit. This process means you get less "off-flavours" and you simply get better quality spirit. Copper is an expensive metal now and it definitely increases the cost of the still manufacture but we can say for sure that there is a very good reason why it's still the preferred material by many serious distillers simply because the results are superior. Dont listen to other people tell you that stainless is the best. There is no substitute for copper and a still like this will last you a lifetime.
• Simple Assembly andSetup
• This still is mostly assembled but you still have to connect your garden hose and coolant supply. You can just use your garden hose but it's a bit of a waste of tap water so we recommend that you get a tank at least 500liters in size then use a powerful recirculation pump to drive the still. We would recommend one of the Ozito pump's that you can get from Bunnings or any other suitable high-pressure pumps you can purchase this separately yourself. We wouldnt recommend a pump too small as you need a reasonably powerful pump to push the water through the condenser as there is a lot of flow restriction in the condenser head. Flow rate is not as importanty as a high head pressure/maximum pressure capability. When you get the still you just need some teflon tape and just attach the fittings as show in the photos above in this add. Please make sure you connect all the fittings and check for leaks before you start distilling. There is nothing worse that trying to attach a fitting once the still has heated up.

Features

• High Quality solid Copper made Condensor
• 240V/2400W/35L Stainless steel turbo boiler with temperature controlled function
• Option between 500w/1900W or combined Heating power rate
• May have a stainless steel sieve plate which fit the boiler well, you can install it if you desired.(contact seller if you want and we got in stock)
• Lead free brass
• Lead free silver soldering
• High quality manufacture
• Super easy to use and will produce high quality spirit

Specification

• Full copper condensor
• Full Stainless steel 35L digital turbo boiler
• +/- 1 C precision for temperature control
• 240V/2400W heating rate with Au/NZ plug
• Option of a 28cm Stainless steel seive plate

Packaging

• Alcoengin Solid condensor for Pot still
• Digital thermometer which can fit the condensor well
• Stainless steel Digital 35L digital turbo boiler
• Option to have a stainless steel seive place which you can install it into boiler

Notes

• The dome is a bit tight to fit the boiler top because of the lip of the boiler. You can use a rubber hammer to fix it. If you care about it, you can go with a 25L Still Spirits Turbo boiler.
• Now there's no more 30L boiler available any more.
• We can help you to fix the stainless steel sieve plate into boiler if you want. Contact seller after you buy.

Gallery

Terms & Conditions