Lanparte One to Many Wireless Control Receiver for Sony A9, A7R3, A7SII, A6500 Camera for LRC-01 Only

Product Info:                                                                                                                                                        

-This is a remote control receiver for Lanparte Remote Controller LRC-01. 

-With additional receivers, you can do one-to-many control to your cameras at the same time. 

-Since both LRC-01 for Sony and LRC-02 for Panasonic are using the same transmitter but different receiver,

 after pairing, you can use this receiver for your LRC-02 too, which means that you can control both the panasonic 

 camera and sony camera at the same time.

 

Pairing Method：                                                                                                                                                 

The transmitter and receiver are paired before shipping. You can follow the step below to re-pair them.

1.Installing batteries for transmitter (If the batteries are correctly installed, the indicator light will blink once the button

  is pressed)

2. Pressing “(REC)Start/Stop” and “Photo(shutter)” button on transmitter at the same time until the light blinks red.

   Then connecting the receiver with the camera as indicated when the camera is power on. (*Please connect the

   recevier when transmitter lights on) The light on the receiver will blink blue to enter into pairing status and the light

   will stop blinking upon completion. Finally, the controller is ready for operation.

 

Pairing Steps for One-to-many Control (For transmitters to control more than one receiver):             

1. Pair the receiver for the first camera as the Pairing Method mentioned. 

2. Take the reviver off from the first camera.   

3. Pair the receiver for the second camera as the Pairing Method mentioned. Please make sure the parameters are set

    to be consistent for each camera.

4. Start using the transmitter to control all the cameras.