Item Description: 

Militec-1, 16 fl. oz (473 ml), Single bottle


MILITEC-1® Dry, Impregnated Lubrication & Grease

MILITEC-1® is the Gold Standard in Combat. Treated weapons have been tested and proven to be more accurate, deliver higher muzzle velocity with the same load, and show decreased wear at all critical wear points. Also, the weapons subjectively "feel" better in blind tests. 


MILITEC-1 Synthetic Metal Conditioner has the unique ability to create a complex, molecular compound within the surface of heated gunmetal. This causes MILITEC-1 to become part of the metal, not merely a temporary coating or a boundary film. There are two main characteristics of this safe new compound. First, it seals and conditions the metal by stiffening (not hardening) the metal surface. Second, it makes the gunmetal self-lubricating under all environmental conditions. 

After a complete application, a MILITEC-1 conditioned firearm is self-lubricating. Self-lubrication gives the firearm's gunmetal the dry lubricity that is required for sustained fire under all environmental conditions. If exposure to dust, sand, or extreme cold is a concern, all excess MILITEC-1 must be wiped away, leaving the firearm's surface metal clean, dry, and constantly lubricated. Please note: Complete corrosion protection and self-lubrication is attained only after both Step One and Step Two (below) are completed. 


Key Features:

Fuel Economy

With MILITEC-1 your car burns less gas!

In a landmark test performed by an agency of the US Department of Transportation, MILITEC-1® delivered a solid 3% increase in fuel economy under very strictly-controlled laboratory conditions.

Another test  completed by the Australian Government used a fleet of delivery trucks, tracking their fuel consumption for over two year and 1,558,000 kilometers (nearly one million miles!). At the end of the test, the MILITEC-1 group showed an average of 11.53% better fuel mileage compared to the control group.


Increased Power

With MILITEC-1 your car engine generates more power!

Tests done by Cosworth (famous builder of racing engines) showed impressive gains in peak horsepower after adding MILITEC-1®.


Reduced Emissions

With MILITEC-1 your car helps the environment!

The City of Corona, California had eight vehicles that would not pass the annual state smog inspection. After adding MILITEC-1 with no additional maintenance, all eight passed easily. What's even more impressive, most of them still passed one year later, with no additional maintenance and no additional MILITEC-1 added!

The City of Corona estimated this saved them at least $15,000.00 in maintenance and repair costs.


Enhanced Reliability

With MILITEC-1 your car requires less maintenance!

A two-year test done by a major East-coast Mass Transit Authority showed incredible reductions in maintenance and associated costs when MILITEC-1 was applied to their buses. During the first one-year test period,  20.1% of the non-MILITEC-1 control group had engine problems. During that same period, only 12.7% of the MILITEC-1 group had engine problems. During the second one-year test period, 25.4% of the control group had engine problems, while only 13.8% of the MILITEC-1 group had engine problems.

The Mass Transit Authority estimated that if they had used MILITEC-1 on all the buses in their system, it would have saved them approximately $920,000.00 in maintenance, engine replacement, and associated costs.




Instructions

Firearms Application:

  • PREPARATION: To take full advantage of MILITEC-1's unique properties, start with a clean firearm. 
  • INITIAL TREATMENT: Applying MILITEC-1® to a firearm for the first time is a two-step process: (1) Application and (2) Firing. 


All gasoline and propane powered engines: Add 8 ounces for a 4 to 6 quart/liter engine oil crankcase capacity every 15,000 miles (24,000 KM). Always change oil at the manufacturer’s recommended oil change intervals. 

Diesel engines: For the first 15,000 miles (24,000 KM) add 2 ounces per quart/liter of engine oil crankcase capacity. Thereafter, add only 1 ounce per quart/liter every 15,000 miles (24,000 KM). Always change oil at the manufacturer’s recommended oil change intervals. 

Racing engines, older engines or other engines operating in extreme conditions: Add 2 ounces MILITEC-1 per quart/liter engine oil every 7500 miles (12,000 km). 

Transmission (manual or automatic): Add 4 ounces every 30,000 miles (48,000 km). 

Transfer case: Add 4 ounces every 30,000 miles (48,000 km). 

Differentials: Add 2 ounces every 30,000 miles (48,000 km) 

Power steering: Add 1 ounce every 30,000 miles (48,000 km). 

Automotive air conditioning: Add ½ ounce when charging with refrigerant. 

Cooling system (radiator): Add 1 or 2 ounces to coolant. Aids heat transfer and lubricates water pump. 

Wheel bearings: First, coat metal surface with MILITEC-1 before packing. Then pack with MILITEC-1 Grease or other quality grease blended with 10% to 15% MILITEC-1. 

Motorcycle common sump pumps: Add 1 ounce per each quart/liter of oil in sump. 

Two-cycle: Add 2 ounces per each quart/liter of two-cycle oil.


Note: 

If the equipment manufacturer specifies that you must avoid synthetic, parasynthetic or chlorinated lubricants, MILITEC-1 should NOT be used.

MILITEC-1 is NOT compatible with polycarbonate.

MILITEC-1 should NOT be added to brake fluid or similar fluids.

Always be sure to follow all equipment manufacturer warranty instructions.