eBay

Kit Contents: BTR Chromoly One Piece Pushrods; 7.400" Long, 5/16" Diameter, .080" Wall, Set of 16SP001-1 .660" Lift BTR Platinum Dual Valve Spring 16 SR001S-16 BTR Steel Retainers For Platinum and Extreme Springs, Set of 16 1 SL505045-16 BTR Spring Locators; .505" ID, .045" Thick, Set of 16 1 VS LS KIT BLUE BTR LS Valve Seal Kit, Set of 16 Blue Seals 1 VL7ÃÂ°8MMBLK-32 BTR Black Oxide Coated Valve Locks; 1 Radial Groove, 7ÃÂ° Angle, 8mm, 16 Pairs 1Note: SK001 springs are designed for use with stock rockers. Heavier roller rockers require more spring pressure to maintain control of the valve train. We recommend our SP002/SK002 for roller rocker applications.

Brian Tooley Racing .660" Platinum Dual Valve Springs Kit & 7.400" Pushrods Set

Kit Contents: BTR Chromoly One Piece Pushrods; 7.400" Long, 5/16" Diameter, .080" Wall, Set of 16SP001-1 .660" Lift BTR Platinum Dual Valve Spring 16 SR001S-16 BTR Steel Retainers For Platinum and Extreme Springs, Set of 16 1 SL505045-16 BTR Spring Locators; .505" ID, .045" Thick, Set of 16 1 VS LS KIT BLUE BTR LS Valve Seal Kit, Set of 16 Blue Seals 1 VL7Â°8MMBLK-32 BTR Black Oxide Coated Valve Locks; 1 Radial Groove, 7Â° Angle, 8mm, 16 Pairs 1Note: SK001 springs are designed for use with stock rockers. Heavier roller rockers require more spring pressure to maintain control of the valve train. We recommend our SP002/SK002 for roller rocker applications.

Kit Contents:

BTR Chromoly One Piece Pushrods; 7.400" Long, 5/16" Diameter, .080" Wall, Set of 16

SP001-1	.660" Lift BTR Platinum Dual Valve Spring	16
SR001S-16	BTR Steel Retainers For Platinum and Extreme Springs, Set of 16	1
SL505045-16	BTR Spring Locators; .505" ID, .045" Thick, Set of 16	1
VS LS KIT BLUE	BTR LS Valve Seal Kit, Set of 16 Blue Seals	1
VL7°8MMBLK-32	BTR Black Oxide Coated Valve Locks; 1 Radial Groove, 7° Angle, 8mm, 16 Pairs	1

Note: SK001 springs are designed for use with stock rockers. Heavier roller rockers require more spring pressure to maintain control of the valve train. We recommend our SP002/SK002 for roller rocker applications.

Interchange Part Number: Steel Retainers, hardened pushrods set, LS1 LS2 LS3 LS4 LS6 LQ4 LQ9 L76 L77 LY6 L92 L99, LR4 LM7 L59 LY5 LMG LMF L94 L96, 4.8L, 5.3L, 5.7L, 6.0L, 6.2L, BTR, LSX, chevy camaro corvette silverado tahoe, gmc sierra yukon denali, pontiac firebird gto g8, hummer, cadillac cts-v, gen III IV LS, 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006, 2007 2008 2009 2010 2011 2012 2013 2014

California Prop 65 Warning: WARNING: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects or, other reproductive harm. For more information, visit www.P65Warnings.ca.gov WARNING: It is illegal to install any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system unless the part is exempted or has an Executive Order issued by the California Air Resources Board (also commonly referred to as the "EO" number). Confirmation: By completing your purchase, you acknowledge that any NON CARB-approved products will be installed for off-road competition use only. Furthermore, by acknowledging you understand the above notice regarding CARB-approved products, and accept responsibility for compliance.

Type: Hydraulic Roller

Fitment Type: Performance/Custom

Manufacturer Part Number: SK001, PR7400312-16

Brand: Brian Tooley Racing

Manufacturer Warranty: No Warranty

Items Included: Valve Spring Kit, Pushrods

Performance Part: Yes