IF YOU NEED ANY HELP OR ADVICE PLEASE DON'T HESITATE TO MESSAGE AND WE WILL DO OUR BEST TO ANSWER YOUR QUERIES!
This prima is recommended when using Riflesso which is a polished plaster
This is for 1Kg of riflesso primer.
Primariflesso Primer small grain
Quartz Primer for decorative
General Characteristics
TECHNICAL DATA SHEET Revisione: 3 maggio 2018
0.11
Composition Recommended usage:
Application
Surface preparation:
Wall water paint made from vinyl copolymers, pigments and fillers selected at high resistance. Suitable as a primer for many decorative.
Suitable as base coat for : Kymera, Domus Aurea, Domus Diamante Oro, Domus Diamante Argento, Domus Oro, Domus Argento, Domus Noir, Pelle di Luna, Solaria, Estasia Oro, Hellenica, Dorotea Gold, Dorotea Silver, Riflesso.
New Surfaces: Make sure that the surface is completely dry and cured - no less than 4 weeks for civil plasters and 2 weeks for premixed plasters. If you need, level any imperfections with a suitable mortar for exterior; then sand and clean the surfaces. Apply one coat of FISSACRIL and, after 4-6 hours proceed by painting with two coats of PRIMARIFLESSO following the technical instructions below.
Painted Surfaces: Remove any traces of mold by brushing away the efflorescence after having treated with acid. Then sanitize with a coat of MUFFACID. Remove old peeling paint residues and, if necessary, fill and smooth any imperfections with a suitable mortar for exterior; then sand and clean the surfaces. Apply one coat of FISSACRIL and, after 4-6 hours proceed by painting with two coats of PRIMARIFLESSO following the technical instructions below
Application techniques
Application methods: Brush and Roller: Dilute with water to 20-25% both for the first and for the second hand. Wait 5-6 hours between one application and the next.
. Airless: When airless spraying, thinning varies depending on the equipment used and the pressure.
Warning: Do not apply on surfaces exposed to the sun
Temperature of application:
+5 ÷ +35
°C
Humidity application:
< 85%
Recommended thickness:
50 ÷ 100
μm per coat
Touch dry:
0,5
h
Recoatable after:
5÷ 6
h
Completely cured:
24
h
Tools cleaning:
with water
Colouring
The product can be colored with Tinting System L’ANGELO and L’ANGELO OX, as well Universal toners.
It is recommended to mix different batches to avoid possible differences of shades during the application.
Technical characteristics
Density:
1,60 ÷ 1,65
Kg/l
Viscosity:
25.000 ÷ 30.000
cPs
pH:
7-8
Weight solids:
73%
Theoretical yeald:
6–7
mq/l
Color:
White and Color chart
Gloss level:
Mat
Pack size:
2,5 - 4 - 14
l
Storage
Safety Precautions
Shelf-life: not less than 2 years original tightly closed. Store away from direct sun and excessive heat.
The can should be resealed and stored tightly closed. Store it upside down after use.
Min storage temperature: +5°C Max storage temperature: +30°C
For all information regarding product use and correct product disposal please refer to Safety Data Sheet.
Items of specifications
Fine quartz professional painting . Preparation of the surface with a coat of FISSACRIL. Apply two coats of PRIMARIFLESSO in the amount determined by the absorption of the surface up to a suitable thickness of the film to dry. Everything must be carried out in accordance with the rules of application, at a cost of € .......... per square meter including material and pose in work.
Warnings
All information contained in this data sheet are based on our technical knowledge. However these indication could not have a value of guarantee for applicator considering that conditions of applying of product are out of our control. It is advisable make sure of suitability of the product making previous test.