Details

1. Two height settings with the option to mount the screen higher to accommodate an official Pioneer undermount speaker at the bottom (lower setting shown in photographs)

2. Vertical support columns bolt to the rear of the plasma display using the wall mount holes providing a neat finish and very secure mounting 

3. Solid metal base (no plastic caps) with high-grade steel box section support columns making these incredibly strong 

4. Satin black finish to minimise reflections from the screen 

5. Supplied with fixing bolts and 1 Year Warranty

Note: These are individually hand-made locally in the UK so although we try to maintain a certain level of finish there may be small imperfections

More information

Pioneer plasma displays are front-heavy due to the glass screen so weight distribution is different to LCD, LED and OLED screens. Before deciding to manufacture these we tried to source after-market options to keep costs down. The larger Pioneer screens have a non-standard VESA rating so we found universal table-stands were very hard to source. The few we found that fitted were very unstable and also allowed the top edge of the screen to tilt forward. Due to this we decided to manufacture our own supports. They have been engineered to be more than capable of supporting the weight of the 60" and 61" panels. We estimate they are actually capable of holding 200+kg 

1. When the TV is on the lower setting the bottom of the screen is approx. 73mm from the table-top (same as the official stands)

2. When the TV is on the higher setting the bottom of the screen is approx. 153mm from the table-top. Use this setting with an undermount speaker or if you wish to have the screen sit a little higher than normal (handy for placing equipment underneath)

3. In the higher setting, with an undermount speaker fitted the bottom of the speaker is approx. 73mm from the table-top (same as the official stands)

4. The horizontal distance between the legs is approx. 810mm (from inside edges) and 890mm (from outside edges). 

5. The legs are approx. 360mm deep (front to back) 

These supports are suitable as a direct replacement for the below Pioneer branded table-top stands: 

PDK-TS30, PDK-TS30A, PDK-TS35A and KRP-TS01

Suitable for all Pioneer branded 60" and 61" model screens (for use with or without an undermount speaker) including the below models:

60"

KRP-600A 

KRP-600M

KRP-600P

PDP-6010FD

PDP-6020FD

PDP-LX6090

PDP-LX6090H

PDP-LX608A

PDP-LX608D

PDP-LX6080D

PRO-141FD

PRO-150FD

PRO-151FD

PRO-1540HD

PRO-607P

PRO-607PU

PRO-6071PU

PRO-607XD

PDP-6100HD

61”

PDP-610MX

PDP-614CMX

PDP-614MX

PDP-615EX

PRO-1410HD

Some model numbers may vary slightly from region to region. These supports fit all 60" and 61" displays and TVs manufactured by Pioneer. They DO NOT fit any other manufacturer's products