Features:
1. Test environment is room temperature 24 degrees, the heating head is B, the working voltage AC220,
due to the environment, the type of heating head and other factors will have a 1-30 second impact,
for example, change the soldering tip into blade tip, the time will change into 45 seconds.
2. Anti-static function: The national standard triangular safety plugs, put the leakage, anti-static protection, to ensure that your work safe use of electricity.
3. Heating core: The use of printing ceramic heating core, the using life is 3 times of ordinary.
Specifications:
Working voltage: AC240-200V
Working frequency: 50-60Hz
Heating core parameters: Resistance 140Ω ± 15%
Size: dia 3.8 X 60mm/0.15 X 2.36in
Output power: 80W
Temperature range: 480 ° C -180 ° C, Fahrenheit 896 ° F-356 ° F
Tin melting after electrification time: 18-20 seconds
Temperature setting: 1 ° Celsius degrees, Fahrenheit 2 ° Fels
Temperature Calibration Range: Fahrenheit ± 100 ° C, Fahrenheit ± 100 ° F
Soldering Tip Specification: Compatible with 936 iron, use 900M series heating head.
Fault alarm indication:
When the LCD shows "EA0": it indicates that the heating core is disconnected.
Approach:
1. Replace the heating core.
2. Check if the heater core pin is oxidized.
When the LCD shows "EU5": it means the power socket is not in good contact or the power supply is interfering with the soldering iron can not work.
Approach:
1. Pull the plug and start again.
2. Turn off the source of interference.
3. Away from the source of interference to use.
Included:
1 X Electric soldering iron
Please Read before You Buy:
1. Size we measured may have 1~3mm error,please make sure you do not care.
2. Price does NOT include tax.
3. We always declare / write real value to Customs.If you want to declare low value to avoid tax,please leave a message when you make order,thanks!