Purchase includes 2 extension brackets, one pair, plus ADJ CL-075 50mm Pipe Clamps (fits up to 2" truss pipes).

This expansion bracket is designed for aluminum and steel trusses of pipes of any size. These brackets t come with ADJ 2" clamps in this listing. There is another listing without clamps so you can use your own pipe clamps for the truss system you have. Works with square and triangle truss systems. 

Expand your truss system by mounting as many of 5 lights and other fixtures at one location on any pipe truss. Have lights offset to point where you want. Greatly increase the lighting intensity and excitement of your truss system and make your mirror balls far brighter and more exciting. These brackets allow you to make better use of expensive professional truss systems

Includes 2 sets of Zinc 1/4" bolts, washers and screws per bracket.

Enough room to mount two 8-inch or larger par can lights as shown or multiple pin spots.

14 inches long overall. Outside mounting holes are 12.75 inches apart. Each bracket has a weight of 11.6 oz. Made of solid grade 205 stainless steel 2 mm in thickness. These are tough thick steel. Unpainted, natural stainless steel.

The mounting holes are 3/8". To accommodate these large clamps there is a 1/2" center hole.

We recommend no more than 10 lbs. per side with the same amount of weight on each end. The real limit is the truss stand you are using. One photo shows our black square bracket holding two 10-lb sandbags, the maximum safe amount of weight per side. Note that even with 10 lbs on each side, they do not bend. All brackets are the same before bending and painting.

Square and round brackets for smaller truss systems are also available. Flat stainless steel brackets with mounting clamps for aluminum professional truss systems also available.

Available also in sets of 5.