Stilo ad emissione aria calda con ventola silenziosa e sadatore stilo con supporto da tavolo.
Bassissima rumorosità e temperatura aria calda sufficiente a saldare e dissaldare componenti anche con stagno lead-free.
Ugelli aria calda intercambiabili compresi nella confezione.
Adatta a dissaldare componenti delicati ed a praticare rework.
Adatta per dissaldare molti tipi di componenti come SOIC, CHIP, QFP, PLCC e BGA
Potenza massima complessiva: 500w, Temperatura stilo: 200-480C°, Temperatura aria calda: 150-500C°
Specifiche tecniche:
MARCA E MODELLO: BAKU BK-601D
Stazione saldante 2 funzioni in 1,display digitale a led, cavo stilo saldante lungo 120cm.
Stilo ad emissione aria calda con ventola silenziosa e sadatore stilo con supporto da tavolo.
Bassissima rumorosità e temperatura aria calda sufficiente a saldare e dissaldare componenti anche con stagno lead-free.
Ugelli aria calda intercambiabili compresi nella confezione.
Adatta a dissaldare componenti delicati ed a praticare rework.
Adatta per dissaldare molti tipi di componenti come SOIC, CHIP, QFP, PLCC e BGA
Potenza massima complessiva: 500w
Temperatura stilo: 200-480C°
Temperatura aria calda: 150-500C°
GARANZIA ITALIA
Hot Selling BK-601D Digital Display Hot Air BGA Soldering Station 2 ln 1 Rework Station For Iphone And Other Cellphone
| Model | 601A | 603A | 601D | 603D |
| Power | 750W | 800W | 750W | 800W |
| Power Comsumption | LED indicator light | LED digital display | ||
| Blower Fan | Brushless Fan | |||
| Amount of Wind | 120L/min(MAX) | |||
| Temperature Range | 100°C-450°C | |||
| Handle length | 120cm | |||
| Size(CM) | 10*14.2*17.3 | |||
| Weight | 1.74kg | |||
| Noises | <45db | |||
Features
1.The products adopt closed loop of transducer with Mcu intelligent drive,Digital LED display and High-power.The temperature turn up is very fast and stable ,it is good for lead free work too.
2.The air flow can be adjustable,and air blowing is big and gentle, plastic components won't be deformed .Such as buzzer and external interface of mobile phone
3.It is inductance in the handle.will be quickly to work when you take the handle,when the handle is return to the shelf,the machine will Automatic stopage.
4.Automatic to blow cool air to safe the heating.Temperature rapidly rises,and it can reach to the setting temperature only within 3 or 5 seconds.
5.Safety remove BGA-IC,Keep pins intact.Blowing PCB will not make it blister.
Operation Instruction
1.To put the unsoldering equipment ready,and leave handle on the holder
2.To connect the power
3.To set the best nozzle(large caliber nozzle preferred)
4.To switch on the power,the screen displays"---",it represents standby mode.(601D/603D)
5.To turn the temperature switch as to set up the require temperature.To turn the airflow switch as set up the require airflow.
6.To hold the handle,so the equipment begins to heat .To adjust the revolving switch of airflow in order to select suitable airflow in order to select suitable airflow,and begin to operate normally while the temperature is stable.
7.To put back the handle on the holder after the work,mean while the unsoldering equipment switch for heating element mode automatically.while the temperature is lower than 100°C,the screen display"---".it stands for switching for heating to standby mode,and after the temperature of Heating element is less than 70°C,the equipment is on standby.