GM Eco Press

GM Eco Press iron on HTV is a soft and eco-friendly polyurethane which is great for t-shirts and other garments. Excellent for intricate and small cuts / lettering.

• Heat Transfer Vinyl PU
• High elasticity and strong adhesive.
• Easy cut and weed.
• Ideal for small lettering or intricate cuts.
• Superb wash durability.
• Can be tumble dried on a low setting and ironed inside out.
• Suitable for cotton, polyester, mixtures of polyester/cotton and polyester/acrylic or similar textiles
• Cut your text or design in reverse and weed out excess film.
• Suitable for use on children's clothing.
• Does not contain animal products.
• Recyclable release liner.
• Plastic free packaging.
• EN71 Certified
• CPSIA Certificated

All of our vinyl is suitable for use in digital cutting machines including Silhouette, *Cricut and Brother Scan N Cut. *Cricut Joy requires cutting mat to be used.

Heat Press

Eco Press is suitable for all cotton & polycotton fabrics. Using a strong pressure, it can be applied using the following press settings:

• 120°C – 15 Seconds
• 130°C – 10 Seconds
• 140°C – 8 Seconds
• 150°C – 5 Seconds

Domestic Iron

If using a domestic iron DO NOT use steam. Ensure the material is on a hard flat surface, not at ironing board. Gently iron the area of application to remove any moisture or creases. Using a cotton setting very firmly press the iron onto the protective sheet for 5 seconds. Carefully take of the cover sheet (if using one) and peel of the clear carrier sheet. Re-place the cover sheet over the vinyl and iron for 1 second. Repeat in 1 second increments until the transfer is fully pressed if nessacary.

Remove the cover sheet (if used). Peel away the clear carrier sheet whilst material is still warm. If when peeling the clear carrier sheet a part of the design hasn’t stuck firmly repress the area for 2 seconds.

Reminder! Leave for 24 hours before washing or using. Machine washable 40°C, low tumble dry. DO NOT dry clean. Eco press is not recommended for nylon fabrics.