index

RC Model PWM Receiver Control Switch 2-Ways 20A Relay for Water Pump Light FPV Camera

-- Description --
  • Only 5V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a buck module.
    One channel servo signal input, control Two way electronic switch
    Two Red LEDs indicate working status of two reday switchs separately.
    The status of two relay(Relay A and Relay B) are mutually exclusive, the means is that one relay is open, the other is close and Vice versa.
    Compatible with all brands of RC Model remote control devices.

    Application:
    - Remote control model rocket launch
    - Remote control model smoke control
    - Weapon system control like real machine
    - Smoke control of the model aircraft
    - Control of various remote switching systems
    - Switch the signals of the two cameras
    - Control the opening and closing of various electrical power sources, such as navigation lights, searchlights, strobe lights, buzzers,water pump etc.
    - Control the camera shutter or switch the camera's recording and camera mode.

    How to use:

    1, Plug the signal cable into an receiver channel that the minimum distance of travel of switch or stick on transmitter should be in the range of 1100us-1900us.

    2, The PWM Pulse width and the relays status:
       800us-1250us: Relay A is close, Relay B is open.
       1250us-1750us: Two relays are open.
       1750us-2200us: Relay A is open, relay B is close

       Take the throttle channel as an example:
       Turn the throttle lever to the full throttle, relay A is close, and relay B is open.
       Turn the throttle lever to the neutral point, two relays are open.
       Turn the throttle lever to the minimum throttle relay A is open, and relay B is close.

    3, The red LED indicates the relay's operating status
-- Specification & Features --
  • * Support receiver voltate: 4.6-5.2V
    * The relay switch support max voltage: 125V
    * The relay switch support max Current: 20A
    * Size: 39mm*25mm*18mm
-- Item Contains --
  • 1 piece of RC Model PWM Receiver Control Switch 2-Ways 20A Relay for Water Pump Light FPV Camera
   

★

Payment
  • We only accept PayPal. Payment must be made within 7 calendar days of the auction end time.

✈

Shipping
  • US usually takes about 7-14 days.
  • Other countries usually takes about 20-35 business days.
  • If  you want the items are shipped by Expedited Shipping (such as DHL,UPS,EMS,Fedex),please choose the Expedited Shipping or contact me.
  • It maybe delay for hot sales season,Strike,bad weather,and so on. It will take more time to ship to some countries. Thank you for understanding!

▶

Return Policies
  • You get 3 month guarantee, and 14 days return policy after get the item, Always buy from me with confidence!
  • If you receive a unsatisfactory item or don't arrive in time. please send us a message via ebay. We promise to give you a satisfactory solution in one working day.
  • Please contact us before you return it (Please do not open return case,we will try our best to solve your problems,thanks)

☏

CONTACT US
  • Because of the time difference, our work time is according to Beijing time (GMT +8:00).
  • 9:00am to 5:00pm Monday to Friday
  • I am ready and eager to answer your question at first time,We apologize for the late reply during the holidays.