VoIP gateway for one ISDN BRI interface and platform for innovaphone PBX
Size: 210 x 134 x 32 mm 1 HE for 19” systems
Weight: 680 g
1 x ISDN BRI: TE and NT mode for trunk interface
2 x analog interface international RJ-11 (2 x LEDs for Link), FXS
2 x Ethernet: RJ 45 interface 10/100-BASE-TX (auto negotiation), Power over Ethernet (802.3af, Class 3)
Slot for one Compact Flash Card Type I
Power supply:
Power over Ethernet (802.3af, Class 3) or external power supply
Power Consumption: see wiki-article „HowTo:Power Consumption“
Digital Signal Processor (DSP) for codecs up to 4 voice channels
2 HDLC channels
125 MHz CPU, 32 MB RAM (since HW 307, before 16 MB), 8 MB Flash
Operation temperature: 0 °C to +45 °C
Humidity: 10% to 90% (not condensed)
Storage temperature: -10 °C to +70 °C
Platform for up to 50 registrations resp. 15 myPBX clients
1 fax interface channel
H.323 Version 5
H.323 over UDP, TCP, TLS
SIP Version 2 conform RFC 3261
SIP over UDP, TCP, TLS
RTP, SRTP, RTCP
T.38 (Fax, supported rates 9.6k and 14.4k)
G.711 A-law / µ-law, G.723.1 (53), G.729A
VAD (Voice Activity Detection), CNG (Comfort Noise Generation)
Dynamic Jitter Buffering
Echo Compensation according to G.168
Data modem support
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
NAT, H.323-NAT
RSTP, IEEE 802.1x
VLAN-ID acc. to IEEE 802.1q
DHCP and LLDP/MED support
NTP support
Routing VOIP-ISDN, ISDN-ISDN, VOIP-VOIP
Automatic dial tone European and US Standard
ENUM for H.323 and SIP protocols
Plays recorded messages deposed on CF card or on a web server
Protocols EDSS1, QSIG
Password protected administration via web-browser, Kerberos server
Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP Traps
Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server