KIA SORENTO - SEAT RISERS

Increase your driver / passenger seat height

We Ship Worldwide.

We have shipped to:  France, Sweden, Spain, Germany, Argentina, Cyprus, USA, Colombia

and many more countries.


Seat Risers are supplied with longer screws and washers as per photo.

These Seat Risers are High Grade Steel and Chemically Blacked to blend in with Seat Rails

Photo shows them before Chemical Blacking has been added


These Risers will fit either the Driver Seat or Passenger Seat - or Both !

Why not buy 2 sets - one for each side - and save a few pennies!

1 Set of 4 Spacers per seat.


These will fit Sorento Models with either Manual or Electric Seats and rails that are straight without curve.

Please make sure your rails are straight and 4 spacers can be placed underneath - if the bars curve at the front, they will not fit.

*Just make sure that the holes will line up when rails lifted. If the trajectory of the holes change when seat lifted they won’t fit.


Simply remove all 4 screws holding seat down to the floor

Lift the seat and place the first 2 spacers to the rear of the seat, and then the second 2 spacers to the front underneath the rails.

Place new longer screw with washer through rail and spacer and lock down tight 

Full Instructions Supplied With Kit


The Spacers are 30mm in height - which may not sound a great deal but increases the drive height considerably.

Simple To Fit - Takes about 10 minutes per seat.


Parts are fitted at your own discretion and without liability.


Any questions - Please ask.