This multi-Purpose Enamel Paint is based on a white spirit polyurethane enamel resin, suitable for brush, roller and spray applications and will provide a high gloss(except Matt Paint), water proof finish with good chemical resistance.
Touch Dry in 2-4 Hours
Overcoat in 12-24 Hours
Full Dry in 7 Days
Provides Good chemical resistance with a gloss finish (except Matt Paint Obviously)
Superb Quality
Quick drying
Bright Vibrant colour
Weather/water Proof
For indoor & Outdoor use (please ensure adequate ventilation for indoor use)
Polyurethane White Spirit Based
Use straight out of the tin
UK Manufactured
Can be used on:
Suitable but not limited to use on Wood, metal, concrete, brick & stone, vehicles, marine vehicles (above & below waterline), farm machinery, skips, garden furniture/decking along with other suitably prepared and primed substrates.
Application:
The following recommendations are a general guide and in no way set in stone. Generally, it’s down to personal preference
Applying with a pot gun
Use a 1:4 to 1:8mm tip set up thinning by 10% if required. Hardener can also be applied
Applying with an air assisted or air assisted airless system
Use a 13-15 thousandths tip (thinners usually not required)
If thinning is necessary use around 10% thinner to paint.
When spraying, Hardener can also be applied
We recommended two coats of paint for the best, longest lasting finish
Applying by Brush or Roller
Can be used straight out of the tin
Thinning is not usually required but if you 10% is recommended.
Recommended Thinner: T0001 White Spirit
Good preparation is paramount to an excellent long lasting finish.
We do not currently stock or supply thinner, hardener or primer. These can be acquired from your local car spares supplier or DIY store.
Coverage:
Approximately 8-10 squared meters per litre.
We cannot be held responsible for the method of application, absorption of substrate or wastage
Preparation
Mix paint well before use and check colour before use
Make sure substrates are suitably prepared (lightly abraded, degreased and or primed)
When applying to pre-painted substrates ensure existing paint is in good condition and lightly abraded to provide a key for the new coating to provide good intercoat adhesion.
Delivery:
We endeavour to get your point to you within 3 days estimated working days. Postage to the following postcodes will incur an additional charge of £10. AB31-AB56, IV, KW1-KW14, PA21-PA40, PH8-9, PH15-PH40, PH49-PH51, SE, FK19-FK21, IV63. Please contact us before buying or the transaction will be cancelled.