Description |
JY-928 (Also called CH-928) is a multi coin selector coin acceptor coin mech, can accept up to 8 kinds of different coins at the same time. This type of coin selector is widely used in Vending machine, Arcade Game, Message chair, and other self–management system. JY-928 is mainly based on material, weight and size to identify coins. We use the most up to date algorithm to design software. Therefore, JY-928 is very stable and accurate even when environment changes such as temperature, and humidity etc… In order to increase the accuracy, we suggest different version of coins use different channel to set up.
Feature |
(1)Capable of accepting all worldwide Coins and Tokens.
(2)Intelligent CPU software control, and high accuracy .
(3)Self-programming without PC.
(4)Accept 1~8 different kinds of coins at the same time.
(5)Free to set up pulses' output.
(6)Prevent not only electric shock but also electromagnetic interference.
(7)Automatic self-test for problems.
Application |
Our coin acceptor widely used in coin kiosk, car washing machine, TV, message chair, cloth dryer, cyber coffee, Laundromat, laundry,computer ,amusement machine , arcade machine etc .
Specification and Size |
Coin diameter | 15mm~32mm |
Coin thickness | 1.2mm~3.8mm |
Atmospheric pressure | 86Kpa—106Kpa |
Accuracy rate of identification | 99.5% |
Working voltage | DC +12V ±10% |
Working current | 65mA ±5% |
Working humidity | ≤95% |
Signal output | pulse |
Speed | ≤0.6s |
Parts Name and Function |
1.LED light-The light of indicidation.
2.4pin Socket
3.Two way switch-signal output NO. or NC.
4.Three way switch-Output signal-fast: 20ms , medium: 50ms , slow: 100ms
5.2pin Socket-Electromagnetic valve DC 12V
6.“Setup” button
7.LED display
8.“Add” button-Plus "+" value
9.“Minus “button-Minus “-” value
10.Coin slot
11.Press-button for removal of blocked coin
12.Return slot of Coin
13.Position of electromagnetic strobe
FAQs |
Coins can't pass through
(1)Check if the connection is correct or poor connection.
(2)Check if sampling is appropriate.
(3)Check if there is something stuck inside.
Can't identify outputs
(1)Check if 2 way switches -NO. NC.- are correct.
(2)Check if Singal wire is connected correctly .
(3)Check if there is pull-up resistor with signal wire(not allowed).
(4)Check if there is something stuck on the channel where the coins pass out.
Coins can not pass smoothly
(1)Check if the parameter is set up appropriately.
(2)Check the accuracy switch
(3)Check if there is something stuck on the channel where the coins pass out.
Package |
One pcs/lot Multi Coin Selector
|