Specification:
1. Input Power:DC12V
2. RF Frequency: 315MHZ、433.92MHZ
3. Standby Current:5mA
4. Match Mode:1527 code
5. Receiver sensitivity: -104dbm
6. Remote Distance: 50-100m
7. Operation mode:Momentary Mode,Toggle Mode,Toggle Mode
8. Output : NO , NC , COM
9. Modulation mode: ASK
10. Working temperature:-10 ~ +80°C
11. Size: 68.2x48.2(mm)
Instruction:
Clearing All Stored Transmitters:
Push the learning button on the receiver 8 times , and the codes will be cleared .
Attention:
After clearing the stored transmitters, all transmitters will need to be relearned by the receiver.
1. Learning the transmitter :(momentary Mode)
Press the learning key on the receiver 1 times, Wait for a moment , the LED will be off , it comes into learning state .
Press the remote button , LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again , learning successfully .
2.Learning the transmitter : ( Toggle Mode )
Press the learning key on the receiver 2 times, Wait for a moment , the LED will be off , it comes into learning state .
Press the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
3.Learning the transmitter : ( Latched Mode )
Note: When you choose for Interlocking mode , in order to learn more remote control , you need to learn two different button , the first time learn is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver 3 times , the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
Package Includes:
1 x Remote Receiver Module (including Case)
2 x Remote Control Transmitters (NOT including battery)