IN-18 Arduino Shield with Adapter Raspberry Pi HAT Nixie Tubes Clock
with Columns and Sockets
Listing includes:
- Shield Board with Sockets (NCS318)
- IN-18 Nixie Tubes – 6 pcs Set (optional, choose in selector)
- Columns with NE2H Dots - 2 pcs (optional, choose in selector)
- Adapter from Raspberry Pi to Arduino Shield (included, NCS3XX)
- Raspberry Pi Board (optional, choose in selector)
- Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)
- User Manual on a Vintage style paper
If you have ANY questions, PLEASE ASK us
Our Benefits:
- Easy to customize firmware under Your own needs, thanks to an open platform – Raspberry Pi/ Arduino.
- Fast uploading via USB.
- The latest version of the firmware is always available on GitHub.
- Human friendly menu.
- Very high qualty of PCB.
- Japan alluminium capacitors.
- Competent Technical support.
Software Features:
- 6 digits IN-18 Nixie tubes [hh:mm:ss].
- 12/24 hour format.
- Time synchronization via the Internet
- Full static display mode. The maximum possible brightness of the tubes.
- Automatic update information on the tubes.
- Unique RGB LED backlight with 16,7 million colors.
Hardware Features:
- Integrated adjustable High Voltage Power supply: 150 – 220 V.
- 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.
- Test points for testing, adjusting and controlling low and high voltage circuits.
- Internal buzzer.
- Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery.
- 3 buttons on board to control.
- IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA – works fluently..
- Temperature sensor connector (DS18B20; 1-Wire protocol).
- 8 pcs of RGB SMD LEDs.
- SPI up to 4Mhz.
- Places for 2 column with 2 neon dots inside.
- Separate controls upper and lower dots.
- Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive “+”).
- Reverse polarity protection.
- Nixie Tubes Clock Shield NCS318 IN-18 size: 264(L) x 90(H) x 53(W) mm