ReForm rPLA - Sangria Red - Formfutura
ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable? without having to make compromises on material properties? and yet keep it affordable.
ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.
Unique features - 100% upcycled / recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA Less environmental impact by quality controlling and re-using extrusion waste streams Only residual waste streams of EasyFil PLA is being re-used, thus as well quality! - Sustainable packaging ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools ReForm filament is packaged in recycled carton boxes - Biodegradable - Very easy to print Warp-free printing and no deformation after cooling Improved flowing behavior and inter-layer adhesion Good first layer adhesion to several (un) heated print surfaces General printing guidelines * Nozzle size:? 0.15mm Layer height:? 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230 ° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60 ° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length?: 1.24 g / cc 50 gr coil 1 Kg spool Ø 1.75mm ± 16.8m ± 335m Ø 2.85mm ± 6.3m ± 126m
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours after payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT CONFORM TO THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which transposed Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refunds or exchanges will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their educational offer by renovating their electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portal ordiniinretepa.it (MePA).
ReForm rPLA - Sangria Red - Formfutura
ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable? without having to make compromises on material properties? and yet keep it affordable.
ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.
Unique features - 100% upcycled / recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA Less environmental impact by quality controlling and re-using extrusion waste streams Only residual waste streams of EasyFil PLA is being re-used, thus as well quality! - Sustainable packaging ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools ReForm filament is packaged in recycled carton boxes - Biodegradable - Very easy to print Warp-free printing and no deformation after cooling Improved flowing behavior and inter-layer adhesion Good first layer adhesion to several (un) heated print surfaces General printing guidelines * Nozzle size:? 0.15mm Layer height:? 0.1mm Flow rate: ± 100% Print temp: ± 200 - 230 ° C Print speed: Medium Retraction: Yes ± 5mm Heat bed: ± 0 - 60 ° C Fan speed: 50-100% Experience level: Beginner *) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting. Filament length?: 1.24 g / cc 50 gr coil 1 Kg spool Ø 1.75mm ± 16.8m ± 335m Ø 2.85mm ± 6.3m ± 126m
MULTIPLE ORDERS
To purchase multiple items is possible request the total from the seller. If we do not receive any request, and the sum of the shipments calculated automatically by eBay is paid, there is no refund.
BILLING
We issue an invoice with a separate VAT indication, to be requested at the same time as the purchase, reporting all the necessary data (with eBay message or PayPal note).
In case of no request, the transaction will be recorded at the end of the day in our fee register. It will therefore no longer be possible to request the commercial invoice relating to the order.
For this reason, we take care of your order right from the packaging, delivering it to the forwarder within 24 working hours after payment (in most cases).
Are available:
- Swiss Post 1 economic service: delivery takes an average of 2/6 working days (excluding remote areas). Being a cheap service (without full tracking) there may be delays that are not manageable by us.
IF YOU RECEIVE AN OBJECT THAT DOES NOT CONFORM TO THE DESCRIPTION, INCORRECT OR DEFECTIVE, CONTACT US IMMEDIATELY TO SOLVE THE PROBLEM TOGETHER.
Purchases made from our online store provide for a period of 14 days for the consumer to withdraw from the distance contract (as established by Legislative Decree 21/2014 which transposed Directive 83/2011 / EU on consumer rights). The fourteen days are understood to start from the moment in which the consumer or a third party, other than the carrier and designated by the consumer, acquires physical possession of the goods. There are some cases in which the right of withdrawal cannot be exercised, for example the supply of goods made to measure or personalized and the supply of sealed electronic material.
Before the expiry of the withdrawal period, the consumer must inform us of his decision to exercise this right.
The right of withdrawal is totally lost: if even partial use of the product is ascertained, if the lack of integral elements of the product (accessories, manuals, etc.) is ascertained, in case of partial or total damage to the product or parts of it , in case of absence or damage of the original packaging. In the presence of one of the above conditions, no refunds or exchanges will be made.
Today we support many companies, FabLabs and digital laboratories scattered throughout Italy, and beyond.
We also turn to schools that are considering expanding their educational offer by renovating their electronics labs or creating new 4.0 spaces. We can provide you with everything you need in terms of components, guiding projects and support for the realization.
We offer the ELECTRONIC BILLING service for Public Administrations.
We are also present in the portal ordiniinretepa.it (MePA).
Listing created with Store360