The high quality Bar'n'Plate core has the best cooling properties to provide optimum performance even in poor conditions and is also very robust. It is characterized by a high resistance and heats itself not so much as comparable networks of other manufacturers. At the same time the whole system is also aligned to the best flow. This means that the pressure loss is minimal and the entire air flow was aerodynamically designed with CAD-flow analyzes. Also included are the cooler boxes, which are made of high-strength aluminum casting.
The advantages of this product is significantly cooler charge air, which improves the combustion of the engine, earlier response and improved flow. Thus, this product is interesting for both factory output, as well as racing. Every single cooler was built on each vehicle, calculated in flow simulations and tested for the in-house dynamometer.
This intercooler system is coming with a part certificate by §19Abs.3 and may be registered so that all our products are subject to constant monitoring on consistently high quality also certified TÜV-operation.
Vehicle Fitment
- Audi S3 8L 1.8T 210 HP
- Audi S3 8L 1.8T 225 HP
Coretype: Bar´n´Plate
Length: 540mm (core)
Height: 245mm (power / level at 175mm)
Depth: 80 mm below / above 40mm (core)
core volume without cast: 12,1 cm³
chargeair piping: inclusive
part certificate: inclusive
Direct comparison:
Series HF-Series
Size left: 183x162x85mm 540x245(level at175)x80(above 40mm)
right: 183x174x85mm
Corevolume 5,225 cm³ 12,1 cm³
Airflow 61,48 cm² 132,3 cm²
Kit Contains:
- Intercooler
- Pressure pipe from the turbocharger to the intercooler
- Pressure pipe from intercooler to intake manifold
- SF-Hoses silicone bow 45° 60mm
- Mounting material
- Part certificate by §19Abs.3
To name an accurate performance increasement, which results by installing an upgrade intercooler in numbers, many unknown factors, like: further hardware changes, as well as the engine software you are using, have to be determined, because this is different from vehicle to vehicle. As a rule of thumb for ECU remapped engines, you can expect up to 5% - 10%. But what at least also as important is: Regardless whether your ECU is already remapped or if it isn´t, upgrade intercoolers preventing a loss of performance at worse conditions, like high outside temperatures or even to reach the temperature protection of your engine. So you will be always able to count on the full power of it.
Recommendation
Use our HF-Series intercooler to complement your hardware and software setup. By reducing the back-pressure (relieving the turbocharger) and improved cooling of the charged air (increasing the oxygen ratio in the combustion chamber + thermal relief), an increased performance results, which lets you use the potential of any turbo-charged engine efficiently.
If you´re thinking about hardware and software tuning on your vehicle, you shouldn´t ignore the fact „Charge air pressure loss“.
So, if you´re increasing the perfomance of your car by chiptuning, the charge air pressure will increase in 99% oft he cases. The use of the standard charge air cooler increases the load pressure loss exponentially. This means that the turbocharger has to work even more and the thermal load on the turbocharger increases, the running time drops or is weakened by the high speeds of the turbocharger.
With our HF-Series intercoolers, we create the perfect balance between cooling effect and charge air pressure loss.
HF-Series
HF-Series is the first point of contact when it comes to fresh air supply in vehicles. With this brand, HG-Motorsport has combined professional research and production of high quality intake systems, intercoolers and air guidance systems. In addition to 3D scanning of the vehicle periphery for perfect fitting accuracy, this also includes long series of tests to combine the optimum components for each individual model. The result is racing products with road approval.
*Please
note: The majority of HG Motorsport products are processed straight
away, but occasionally some applications have to be special ordered
which can take upto a maximum of 2/3 weeks for delivery as the products
come from Germany. If there will be any delays in your order you will
be informed within 24-48 hours.
Distributed by Haz Motorsport
