Description:

Maximum width: 110 mm, 110 mm (or 11 cm, 11 cm or 0.11 m), but some size under the condition of interference with the sleeve nut, the maximum

width of 100 mm.(note: remove the socket move hands, tighten the plus, extra 10 mm)

Maximum thickness: 0 ~ 2 mm. The narrow point 2.5 mm or 3 mm is no problem.(note: if it is 3 mm, changes to the machine, increase the clearance only)

Applicable materials: iron, copper, aluminum, stainless steel, etc.

Minimum flanging height: 8 mm. Thin material, can be smaller to 5 mm.

Gross weight: 2.3 kg

Bending Angle: 90 ° (cant have considered rebound Angle, pressure plate for, namely for small rebound Angle, actual folding to 85 degrees)

(note: the rebound Angle, it is to point to different materials, or the same material and different thickness, bend, bounce back Angle, any material rebound Angle)

The forming ability:

Depends on the size of the clamp, clamp on 25 mm wide, 8 mm thick.