Tips:
The compatibility table is only for reference, please make sure to verify the bulb model of your vehicle before purchasing. If you are not sure, you can refer your car user manual or try to find your car in "Sylvania Automotive Lamp replacement guide".
Few vehicles will request a bulb holder to lock the bulb, and this part does not include a bulb holder.
If you need load resistor or other bulb model, please feel free to contact us.
Package include:
2x H7 LED Headlight Bulbs
Features:
- SERIES: S7
- Power: 180W/Bulb, 360W/Pair
- Lumens: 1800LM/Bulb
- Waterproof: IP67
- Each Bulb have 2 sides of Super Bright LED Chips
- Complete Kit: No Other Ballast/Driver Required Just Plug and Play - Newest Technology
- Need additional Parts or Modification? 100% Integrated Design, Plug and Play.
- Smart Efficient Cooling System, Built-In Cooling Fans For Fast Heat Dissipation
- High quality Aluminum heat dissipation ensures the secure temperature range
- Low Power Consumption than Halogen bulb or Hid Kit, Energy Saving
- Low Voltage Protection, High Precision Constant Current driver Chip
The latest design of the led headlight , whose luminous point is the same as the factory light, thus beam Pattern is flawless.
Our LED headlamps advantages:
- High brightness
- Instant Startup
- High temperature resistant
- High purity of luminescence
- Good stable performance
- Instant on fast cooling
- Energy saving environmental
- Long lifespan(>50000hr)
FREQUENTLY ASKED QUESTIONS, PLEASE SEE THE FOLLOWING SOLUTIONS
- Both side could not work.
Answer: Please turn around the plug (swap the polarity) and try again
- One side could not work.
Answer: 1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
- Both side flicker/interference/error light.
Answer: Your car need a resistor Cancelers Decoders, you can contact our customer service for help.
- My bulb type is H7, but the one you sent could not fit.
Answer: Your car need a bulb holder to lock the bulb, you can get one from ebay according to you vehicle model.
- My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip.
Answer: Different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell.
- The bulbs is loss and it could not fit(H8/H9/H11/9005)
Answer: Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.
![S2-b](https://image.pushauction.com/0/0/8e988417-c089-40ae-aab8-6eabffe3f1f7/ebdaaa92-c25c-4ff8-b745-b975ad1c93cb.jpg)
![installation_Copy29](https://image.pushauction.com/0/0/8e988417-c089-40ae-aab8-6eabffe3f1f7/1388f920-f7e5-4461-9f51-724875593cd5.jpg)