Product Description
1.For the first time use. please pull out the plastic separator at the battery holder.
2.Mount the camera on a tripod or place the camera on a stable, level surface.
3.Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.
4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infraed receiver is not blocked by the lens or other obstacles).
5.How the camera focuses and shoots depends on the option selected camera's custom setting.For futher information,check your camera's manual.
6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.
7.Battery : CR2025.
Lithium CR2025 battery (inside) x1 （Not included）
Contains
Remote Control x1

Original Manufactory Package


Compatible with: (NOTE: RC-6 remote will not work with EOS 50D)



EOS 5D Mark II
EOS 7D
Eos 60D
EOS Rebel T1i / 500D
EOS Rebel T2i / 550D
EOS Rebel T3i / 600D
EOS Rebel XSi / 450D
EOS Rebel XSi / 450D
EOS Rebel XT / 350D
EOS Rebel / 300D and any other canon models which support remote control mode.