Remember this is a receiver only, it dos not transmit back to your Bluetooth speaker/earphone/headphone/sound bar/receiver.

 

Features:

Use this Bluetooth music receiver instead of buying a brand new Bluetooth sound bar; turn your older stereo into a nifty Bluetooth capable one

Dual Device Link: Connect two Bluetooth devices simultaneously; free to enjoy music from either of the two paired devices

This one offer three useful outputs – analogue RCA (instead of lower quality headphone jack), digital optical and digital coaxial - all work in parallel so one Bluetooth input can be distributed to three amps/DACs at the same time

 

The use of a dedicated digital-analogue-converter (instead of the cheap integrated DAC of the Bluetooth chipset) enables audiophile grade sound output at the analog RCA jacks

 

Sound quality with aptX LL though better than from SBC codec so aptX LL Bluetooth is far superior to standard Bluetooth

  

Setup is extremely easy. Once plugged in, the device automatically makes itself available to be paired. No password or key required

 

Compatible with all DSPs, standalone DACs, amplifiers, preamplifiers, power amplifier, A/V receiver and PA speakers

 

Auto-reconnect to last paired device during power-up, remembers up to 8 devices at once

aptX Low Latency codec ensuring synchronized audio during video playback

 

It runs stone cold, not surprising since Bluetooth uses very much less power than Wi-Fi

 

Specifications:

Bluetooth chipset: QCC3034

 

Bluetooth v5.1 + EDR, Class 1 - A2DP

 

Built-in 32Bits DAC: Burr-Brown PCM5102A

 

Working range: 100 ft line of sight

 

Audio input: Bluetooth ONLY

 

Audio outputs: L/R RCA, digital TOSLINK optical and digital S/PDIF coaxial

 

Power input: 5V DC (0.2A-3.0A) power supply excluded, USB power cable included

 

Supported audio codecs: aptX, aptX Low Latency, SBC, AAC, MP3, FLAC, DSD

 

FAQ:

Does the power supply adapter come in the box, if not what kind of power input is needed?

No, it does not come in the box as most of us probably have an extra power supply lying around.

Any 5V DC USB charger (current range: 0.2A~3.0A) is fine for BluDento.

Is this version also a Bluetooth audio transmitter?

It’s just a receiver/DAC.

RX mode only.

 

What if your amp has a DAC, do you need the Bluetooth DAC?

This is primarily a Bluetooth receiver but also does a pretty good job as DAC. If you already have a DAC this only makes sense if you would like to stream your music wirelessly.

If you use the optical and coaxial outs, it will bypass the internal DAC.

 

Is it possible to rename the Bluetooth ID if two devices are used in adjacent rooms?

Of course, just leave us a message right after your purchase.

 

Can you have two identical hi-fi Bluetooth music audio receiver in one household?

Yes, you can.

It will not interfere with each other during playback.

 

Does it have an on/off button or auto-on when power is connected?

No buttons: the Bluetooth is always on when the unit is powered on and it doesn’t go to sleep.

No controls (volume, play/pause, prev/next): you can just change it and adjust volume or pause from your phone without running over to the stereo.

 

I have multiple phones/tablets/laptops. I can't tell which is currently connected to the device. How can I force-pair the one I have in my hand?

Do it manually.

You must disconnect from your previous connected device to connect to a new one.

 

How many Bluetooth devices can simultaneously stream to this device?

2 devices.

 

What are the accessories?

USB to micro USB power cable – 1.0 meter

RCA cable – 0.8 meter

RCA to 3.5mm adapter – 0.15 meter

Optical cable – 0.8 meter

 

Can a 3.5mm aux plug into this?

Yes, a stereo RCA to 3.5mm adapter is included.

How to turn it off?

First:      Turn Bluetooth off on local device when not using

Second: Unplug the power

 

Shortcomings:

There is no power switch

You can pair the receiver with 2 devices at the same time. But only one can play at the same time, you have to pause the other.