LED Lighting strips for PC Cases and ARGB Controllers
These are compatible with 5V ARGB/DRGB Controllers and supported motherboards.
Options available are:
1. LED strip in various lengths. These do not come with any connectors.
2. LED strips of different lengths with Cable to easily connect from your motherboard to the LED strip. The LED strip has a connector attached and just has to be plugged into the cable which then plugs into your motherboard.
Customize your pc with LED lighting to any colour or colours you like. Each LED is individually addressable.
You can set each individual LED to any colour that you like, rather than them all having to be the same colour.
These LED strips are very bright and compatible with ARGB (3 PIN) Lighting only.
Individually addressable LED's allow you full control over customizing your lighting.
Can be cut at each individual LED to allow further customization of placement of the LED's
Self adhesive tape on the LED strip allows ease of installation.
Multiple strips can be installed using our 1 to 2 or 1 to 3 adaptor leads - https://www.ebay.co.uk/itm/154226845550
Approx. length of each LED from one cut line to the next is 16.6mm
Approx. width of LED strip is 10mm
Please note they do not come with connectors unless you order the cable and LED. The buyer will need to solder 3 pin connectors to the LED strip, observing correct direction (an arrow indicates which way these should be connected).
WARNING:
THESE ARE 5 VOLT LED'S, NOT 12 VOLT!!
THEY ARE NOT COMPATIBLE WITH STANDARD 12V LED HEADERS FROM YOUR MOTHERBOARD.
THEY ARE ONLY COMPATIBLE WITH LED CONTROLLERS & MOTHERBOARDS WHICH SUPPORT THE ARGB STANDARD AND HAVE A 3 PIN/5V CONNECTION.
THE BUYER IS RESPONSIBLE FOR ENSURING THIS PRODUCT IS SUITABLE FOR THEIR PROJECT.