30mm deep carbon clincher disc brake wheels for road or cyclocross use. Handbuilt in the UK by a professional wheelbuilder rather than by a machine. Rims are Carbonal 100% carbon fibre. Made from a mixture of high spec Mitsubishi Toray T700 and T800 carbon fibres all the way through. The core is 3k carbon weave and there is a thin outer layer of UD carbon to give a smooth finish. 30mm deep aero section which is 25mm wide at the rim and 28mm wide at the mid-point. The extra width adds wheel stiffness and allow tyres to achieve their full width. Tubeless compatible with tubeless tape and valves. Suitable for road clincher tyres up to 32mm with tubes or tubeless. Also all cyclocross clincher tyres. The rims are supplied plain matt black, without any decals, to allow riders to add their sponsors/own graphics if desired. Choice of either 24/24 or 28/28 spoke builds. Suggested weight limits are 80kg road (85kg CX) for 24/24 spoke build and 90kg road (95kg CX) for 28/28 spokes Novatec D611 or D791SB-CL centrelock front hub. Standard road/MTB bike dimensions of 100mm wide with a choice of QR, 12mm or 15mm thru axle fitting. These are a light disc hub and weigh a 136g in 12mm format. 2 x high quality Japanese sealed bearings. Gloss black.
Novatec D612 or D792SB-CL centrelock rear hub. Lightweight at 260g. 4 x high quality Japanese sealed bearings. Gloss black. Option of QR,or 12x142 axle.
Choice of Shimano 11, SRAM XD, SRAM XDR or Campagnolo freehub. 6 bolt disc hubs available at same cost. Supplied with lightweight Novatec QRs if required.
The spokes are super high quality Belgian made Sapim CX Ray bladed spokes in silver fastened by silver Sapim 14mm alloy nipples. CX Ray spokes are among the lightest spokes available but have great strength and aero properties. Unfortunately they are also rather expensive! The wheels are built using a 2x on both wheels for strength under braking and reliable power transmission. Total wheelset weight is around 1395g for the 24/24 spoke build with the 12mm front and 12x142 rear hubs pictured. 28/28 spoke builds 40g heavier. Please note that the wheels photographed have optional black CX Ray spokes and red alloy nipples Options: Black CX Ray spokes +£20 Coloured alloy spoke nipples - choice of gold, orange, red, blue, purple, green or black +£16 Sapim Race spokes with brass nipples (heavier by 90g) - £80 cheaper for silver or £60 cheaper for black Sapim D-Light spokes with silver alloy nipples (heavier by 30g) - £50 cheaper for silver or £30 cheaper for black Bitex centrelock hubs +£55 ERASE centrelock hubs +£195 (12mm thru axle only) Hope Pro5 hubs in centrelock or 6 bolt disc and a range of colours +£145 Tubeless set-up +£18 All our wheels are handbuilt to the same high standards. The wheels are trued to within +or- 0.2mm and spokes uniformly tensioned to within 5% a side. Please look at the other wheelsets and products available in our shop. If you are looking for something special or have specific needs, please contact us for a custom build quote via www.spokesmanwheels.co.uk If you have any questions please ask. Thanks for looking, Mark |