IN-14 Arduino Shield NCS314-4 Nixie Tubes Clock in Acrylic Case
UPS Express delivery highly recommended Economy Shipping slow and unreliable
IN-14 Arduino Shield Nixie Tubes Clock in a Clear Acrylic Case [with Column and Sockets] [4 TUBES]
Shield Nixie Clock in Acrylic Case with Column
Designed for 4 IN-14 xUSSR Nixie Tubes with Sockets
IN-14 Tubes are the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
External Temperature sensor with PH2.0 connector included with the Clock
Accessories include Temp. sensor, GPS Receiver and IR Remote
Nixie Clock is designed for Arduino UNO and MEGA 2560 Boards
It allows you to write your own unique programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH
Listing includes:
Arduino Shield Nixie Clock in Acrylic Case with Column
Temperature sensor (DS18B20) (included, external with PH2.0 connector)
Temperature sensor (DS18B20) (optional, choose in selector)
GPS Receiver (GA-6) (optional, choose in selector)
IR Remote (RM-X153) (optional, choose in selector)
Power Supply (12V, 1A) (US, EU, UK, AU) (included, optional AC plug)
User Manual on vintage-style paper
Temperature sensor with PH2.0 connector is optional for the Clock
Power Supply is included with the Clock
Dear customers! If you have ANY questions, PLEASE ASK us
Software Features:
Clock uses rarest xUSSR nixie tubes IN-14 – 4pcs.
Date format: [DD:MM]; 12/24 hour format: [HH:MM].
Full static display mode. The maximum possible brightness of the tubes.
Slot Machine (Anti poisoning - tubes saving function. Increases the service life).
Temperature measurement [Celsius or Fahrenheit] (optional - choose in selector).
GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional - choose in selector).
IR remote controls (Remote control model Sony RM-X151/RM-X153, optional - choose in selector). IR protocol SIRC or any protocol if you able to implement it.
Automatic update information on the tubes.
Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!
Switching on/off LED backlight in the matter of seconds.
As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You…).
Easy updating firmware via USB using Arduino IDE.
Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test - our soft check each segment on every lamp. Distinguishable to see segment failure.
Hardware Features:
Highly Accurate RTC (Real Time Clock) DS3231SN with backup battery.
Integrated adjustable High Voltage Power supply: 150 - 220 V.
High voltage adjusting potentiometer.
3 control buttons on board.
8 pcs RGB SMD LEDs.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).
High quality PCB and components. We use Japanese aluminum capacitorsonly (Nichicon, Panasonic).
Internal buzzer.
Test points for testing, adjusting and controlling low and high voltage circuits.
Plug for optional external GPS receiver (only with Arduino Mega).
IR receiver TSOP4836 for optional IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA - works fluently.
3 pin connector for optional Temperature sensor (DS18B20; 1-Wire protocol).
Plug for optional external GPS receiver.
SPI up to 4Mhz.
Places for 2 column with 2 neon dots (digits separator).
Independent controls for upper and lower dots.
Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive "+").
Reverse polarity protection.
IN-14 Tubes Clock dimensions: 180(L) x 90(H) x 78(W) mm.
Our Benefits:
Easy to build beautiful clock – we also offer the case.
Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
Fast uploading via USB.
The latest version of the firmware always available on GitHub.No need for additional drivers – we are use only Genuine USB to serial converters (FTDI). Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux.
Human friendly menu.
Very high qualty PCB.
Japan aluminium capacitors.
Complete Power On Self-Test (POST): LED backlight, tubes and sound. Unique circumstantial tube test.
Competent Technical support.
IN-14 Nixie Clock Shield NCS314-4 in Acrylic Case:
Dear customers! If you have ANY questions, PLEASE ASK us
Shipping and Return information
All Items are shipped from Ukraine Via International registered Airmail Shipments are made within 1 business day After the payments are received and verified It takes about 4-7 days via UPS Express delivery It takes about 10-18 days via Standerd shipping It takes about 35-45 days via Economy shipping We combine multiple Items to save on shipping
UPS Express Shipping time (recommended):
Europe:
3-5 days
Germany:
3-5 days
USA, Canada:
4-7 days
Asia, South America:
5-7 days
Australia, New Zeland:
5-7 days
Africa, Central America:
5-7 days
Standard Shipping time:
Europe:
10-12 days
Germany:
10-12 days
USA, Canada:
10-15 days
Asia, South America:
10-18 days
Australia, New Zeland:
12-18 days
Africa, Central America:
12-18 days
Economy Shipping time:
Europe:
25-30 days
Germany:
25-30 days
USA, Canada:
30-35 days
Asia, South America:
35-45 days
Australia, New Zeland:
45-55 days
Africa, Central America:
45-55 days
Return Policy
All Returns are accepted
For Return you should contact Us within 14 Days after receiving the Item
Refunds are made as Money back or Replacements (buyer’s choice)