Mouldmaster Rapeseed and Coconut Wax Blend
For Wax Melts/Tarts ONLY
In Pelleted Form
Rapeseed Melt Blend is a specially formulated blend of rapeseed and coconut for wax melts and
tea-lights. The wax is not derived from Genetically Modified crops, it contains no soy or palm derived
materials, contains no other additives and is vegan friendly as well as Halal and Kosher certified.
It is not suited for pillar or container candles
Melting
The wax should be melted to around 75°C when using dyes to ensure they fully dissolve into the wax.
Care should be taken to avoid scorching while the material is being melted. It is recommended that
moderate stirring is carried out. Sustained temperatures above 90-100°C should be avoided. When
not including dyes the wax does not need to be heated as much – up to 65°C is sufficient.
Fragrances
Fragrances should be added at 60-65°C and the wax stirred well to ensure it is homogenous.
Each fragrance should be tested for compatibility before use in production scale as some fragrance
components may have limited solubility in the wax blend (incorporating into the wax at high
temperatures but separating out once cooled). Once cooled, further testing should involve cycling
the ambient temperature of the test candle between c. 5°C and 25°C to test for any fragrance
leaching. The higher the fragrance loading, the greater the likelihood that components may separate
out. Good results have been achieved at 8% loading but higher fragrance loading may be possible,
subject to testing.
Pouring
This wax is quite versatile with regard to pour temperatures, with good results achievable pouring
between 45°C and 65°C. If pouring in a cold room, it is best to pour at the hotter end of the scale to
avoid lines forming when the wax touches the side of the mould.
As always, minimise the time that the wax is maintained at elevated temperatures in order to reduce
loss of fragrance top notes.
Curing
The melts produced should be allowed to cool and cure for a minimum of 24 hours.
Lower weights may include packaging.