.jpg?versionId=SC2yn6b.q1ke3.eG.jx0OCuNuChfQEIP)
Visit our eBay store for many more colour ranges, surface finishes and sizes. We offer one of the largest selections of plastics and are proud to be the UK’s only approved stockist of acrylic sheet for both Perspex® and Plexiglas®.
If your size is smaller than one of our standard size sheets, you can simply order the size above what you require and send us a message immediately AFTER you have placed your order.
This will ensure the message and order can be matched together.
Note:
Minimum dimension of 50mm.
Offcuts will not be supplied unless requested.
If you are looking for sizes not shown, polished edges, holes, cut outs or bulk buying, please message us with your requirements for a quotation.
Need A Custom Size?
Item Description
Brand new Plaskolite® See-Through 2-Way Mirror acrylic sheets.
See-through mirror from one side to the other.
Ideal for surveillance and theatre props.
Safety mirror, stronger than glass and shatter resistant.
Gloss surface finish on both sides.
Lightweight, only half the weight of glass.
Supplied with protective film on both sides.
Decorative use only as the reflection may distort over large areas.
Many more colours and materials available in our eBay store.
Contact us for custom sizes, holes, cut outs, shapes and/or polished edges.
See-through 2-way acrylic mirror allows a percentage of incident light to pass through, while reflecting the remainder. This allows for one side to be see-through whilst the other appears as a mirror. For the 2-way to work, one side must be illuminated more than the other. The side that is illuminated will see a mirror reflection whereas the side that is darkened will be able to see through the mirror.
Important: Please be advised that acrylic mirror is flexible therefore if the mirror is not 100% flat, there will be a distortion in the reflection. If mounting to an uneven surface, we would advise that the material is first bonded/fixed to a flat surface like a solid piece of mdf or thick ply. When bonding, ensure the mirror adhesive is evenly applied.
Outdoor use: The mirror backing can be affected from continuous exposure to moisture therefore we do not recommend acrylic mirror for outdoor use however if used outside, we would suggest the perimeter is sealed with a silicon sealant to help keep moisture out and protect the mirror backing. Salt spray can also have an adverse affect on the mirror backing.
Acrylic can sometimes be referred to as Perspex®, Plexiglas®, Lucite®, Altuglas®, Acrycast® or Policril®. These are simply brand names of acrylic, much like Hoover® is with regards to vacuum cleaners.
IMPORTANT NOTE:
All images are for demonstration purposes only. Different monitors and printers will have varying colour settings. We advise you to purchase a sample if you are concerned about exact colour matches. We cannot guarantee the sample thickness.
Extruded acrylic has a standard industry thickness tolerance of +/- 3%.
Delivery
Depending on the size and quantity of your order, we will use either Royal Mail or a reputable courier to deliver your order. Please provide a contact number to ensure a successful delivery.
Should you have an urgent request, please contact us before placing your order.
Delivery times are subject to stock availability. In the unlikely event we are unable to deliver your order in time, we will contact you immediately, inform you of the delay and offer a revised due date. We will of course issue a full refund should the new due date be unsatisfactory.
Our listings include delivery based on Standard UK Mainland addresses. Do not worry if you are in the Scottish Highlands, Northern Ireland, Isle of Wight, Isle of Man, Scottish Isles or an other Isles off the UK mainland as we can deliver to you however there may be additional delivery costs. In many cases, if your order can be sent via Royal Mail, there will be no additional charges however please contact us for a quote prior to order.
We Also Fabricate!
In addition to being stockists, we also have a team of highly skilled fabricators. Combined with our computer guided saws, lasers, CNC routers we are able to assist you with your plastic fabrication requirements. We have a wide array of products for home and retail.
Visit our eBay store for many more colour ranges, surface finishes and sizes. We offer one of the largest selections of plastics and are proud to be the UK’s only approved stockist of acrylic sheet for both Perspex® and Plexiglas®.
Item Description
Brand new Plaskolite® See-Through 2-Way Mirror acrylic sheets.
See-through mirror from one side to the other.
Ideal for surveillance and theatre props.
Safety mirror, stronger than glass and shatter resistant.
Gloss surface finish on both sides.
Lightweight, only half the weight of glass.
Supplied with protective film on both sides.
Decorative use only as the reflection may distort over large areas.
Many more colours and materials available in our eBay store.
Contact us for custom sizes, holes, cut outs, shapes and/or polished edges.
See-through 2-way acrylic mirror allows a percentage of incident light to pass through, while reflecting the remainder. This allows for one side to be see-through whilst the other appears as a mirror. For the 2-way to work, one side must be illuminated more than the other. The side that is illuminated will see a mirror reflection whereas the side that is darkened will be able to see through the mirror.
Important: Please be advised that acrylic mirror is flexible therefore if the mirror is not 100% flat, there will be a distortion in the reflection. If mounting to an uneven surface, we would advise that the material is first bonded/fixed to a flat surface like a solid piece of mdf or thick ply. When bonding, ensure the mirror adhesive is evenly applied.
Outdoor use: The mirror backing can be affected from continuous exposure to moisture therefore we do not recommend acrylic mirror for outdoor use however if used outside, we would suggest the perimeter is sealed with a silicon sealant to help keep moisture out and protect the mirror backing. Salt spray can also have an adverse affect on the mirror backing.
Acrylic can sometimes be referred to as Perspex®, Plexiglas®, Lucite®, Altuglas®, Acrycast® or Policril®. These are simply brand names of acrylic, much like Hoover® is with regards to vacuum cleaners.
IMPORTANT NOTE:
All images are for demonstration purposes only. Different monitors and printers will have varying colour settings. We advise you to purchase a sample if you are concerned about exact colour matches. We cannot guarantee the sample thickness.
Extruded acrylic has a standard industry thickness tolerance of +/- 3%.
Need A Custom Size?
If your size is smaller than one of our standard size sheets, you can simply order the size above what you require and send us a message immediately AFTER you have placed your order.
This will ensure the message and order can be matched together.
Note:
Minimum dimension of 50mm.
Offcuts will not be supplied unless requested.
If you are looking for sizes not shown, polished edges, holes, cut outs or bulk buying, please message us with your requirements for a quotation.
Delivery
Depending on the size and quantity of your order, we will use either Royal Mail or a reputable courier to deliver your order. Please provide a contact number to ensure a successful delivery.
Should you have an urgent request, please contact us before placing your order.
Delivery times are subject to stock availability. In the unlikely event we are unable to deliver your order in time, we will contact you immediately, inform you of the delay and offer a revised due date. We will of course issue a full refund should the new due date be unsatisfactory.
Our listings include delivery based on Standard UK Mainland addresses. Do not worry if you are in the Scottish Highlands, Northern Ireland, Isle of Wight, Isle of Man, Scottish Isles or an other Isles off the UK mainland as we can deliver to you however there may be additional delivery costs. In many cases, if your order can be sent via Royal Mail, there will be no additional charges however please contact us for a quote prior to order.
In addition to being stockists, we also have a team of highly skilled fabricators. Combined with our computer guided saws, lasers, CNC routers we are able to assist you with your plastic fabrication requirements. We have a wide array of products for home and retail.
We Also Fabricate!