Bullet Points:
1. Support Bluetooth audio music and hands-free calls, built-in AUX function, premium audio output can be connected to the subwoofer, support active subwoofer.Great version,packaged perfectly.
2. Digital premium FM stereo AM/FM radio (FM 87.5~108MHz/A522~1620KHZ) supports FM1, FM2, FM3 three bands, can store 18 FM radio stations.
3. Support card reading, U disk reading (broadcasting), support audio: MP3/WMA/WAV/.
4. Power-off memory: memorize frequency, track, volume, after power off and restart, start playing from the song when power off, avoid listening again, time display: one-key switch time display, real-time control of time.
5. Voice assistant function: (After successfully connecting to BT, in BT mode, long press the knob to enter the voice assistant).
Specifications:
Model: 616
Voltage: 12V
Type: Car MP3
Software solution: A3901
Screen model: LCD_VA
Panel size: 188*58mm
Panel light: blue light
Packing size: 205*148*76mm
Host depth: 60mm
Single machine: 370g
Radio band: FM
Radio chip: chip integration
Power: 4*60W
Working temperature: -10~60 degrees
Bluetooth model: version 5.0
Power amplifier chip: YD1029
Radio frequency: FM 87.5~108MHz/A522~1620KHZ
TF card slot: TF small card
Remote control: steering wheel remote control
USB interface and version: one USB2.0 interface, one USB 2.1A charging interface
Reset button: Yes
Button: physical button
Terminal introduction: 2 outputs (red/white lotus jack)
Supported audio format: MP3/WMA/WA
Front aux audio input: Yes
Packing list:
1x MP3 player
1x Power cord
1x Steering wheel remote control
1x Manual
2x Disassembly key
Notes:
1. This machine is a 12V machine and does not supply power according to 24V
2. As long as the installation size of the car audio matches the size of the machine, it can be installed and used.
3. When installing the machine, be sure to connect the wires correctly. If the machine is not powered after installation, please connect the red and yellow wires to the positive pole of the 12V power supply and the black wire to the negative pole of the power supply to see if the machine can be turned on normally. If it can be powered on normally, it may be a wiring problem. You can seek our help so that you can use the product better.