Highlights:

• heavy steel alloy platter with felt mat provides excellent speed stability
• high-precision stainless steel and bronze bearing assembly for smooth, quiet platter rotation
• custom carbon fiber tonearm for superb tracking ability
• includes pre-mounted Music Hall Spirit moving magnet cartridge
• tonearm features adjustable height and anti-skate settings for optimizing sound with different cartridges
• separately isolated DC synchronous motor for reduced vibration and superior speed stability
• medium density fiberboard (MDF) base with adjustable vibration-damping feet
• gold-plated RCA audio jacks with detachable phono cables
• high-gloss red lacquer finish
• fully manual operation
• 33-1/3 and 45 rpm speeds (manual speed change)
• speed variation: ±0.18%
• wow and flutter: ±0.11%
• rumble maximum: -68dB
• frequency response (with included cartridge): 20-20,000 Hz (±3dB)
• channel separation (with included cartridge): greater than 20dB (at 1kHz)
• external power supply reduces likelihood of electro-mechanical interference
• 17"W x 4-1/2"H (with dust cover down) x 13"D

Features

Belt-Driven + Isolated Motor: The Music Hall turntable employs a low noise fully manual belt drive design that supports two speeds (33/45 rpm). A 45 rpm adapter is included. A separately isolated DC synchronous motor for superior speed stability.

Alloy Platter with Stainless Steel/Bronze Bearing Assembly: The Music Hall MMF-2.3 turntable features a full-size alloy platter  and comes with a felt mat. The alloy platter runs on a precision, stainless steel and bronze bearing assembly to provide fluid and quiet operation.

Carbon Fiber Tone-Arm: The Music Hall MMF-2.3 turntable features a custom carbon fiber tone-arm for superb tracking ability.

MM Phono Cartridge: The Music Hall Spirit moving magnet (MM) phono cartridge is pre-mounted and properly aligned. The turntable's elliptical stylus is user replaceable.

Optional Phono Preamp: If your amplifier does not have a suitable Phono MM input, a separate phono preamp (sold separately) is required to connect the turntable to your amplifier.

MDF Plinth w/ Damping Feet: The medium density fiber (MDF) plinth stands on three special, resonance damping feet for exceptional stability. The feet are adjustable for perfect leveling.

Gold-Plated RCA Connectors: The Music Hall turntable is fitted with gold-plated stereo RCA connectors and comes with a 4' stereo RCA audio cable.

Dust Cover: The Music Hall MMF-2.3 comes supplied with a dust cover to prevent dust build-up on the turntable.

AC Power Adapter: The turntable operates off of standard household current using the included external power adapter.

Colors: The Music Hall MMF-2.3 turntable is available in high gloss piano black, red, or white finish.

Specifications

Turntable Specs:

• Power Absorption: 2VA
• Speeds: 33/45 rpm
• Speed Deviation: +/- 0.9%
• Wow & Flutter: +/-0.15%
• Rumble Max: -70 dB
• Tracking Force: 10-30 mN
• Effective Tone-Arm:
  • Length: 9" (22.9cm)
  • Overhang: 0.67" (17mm)
• Platter Diameter: 11.81" (30cm)
• AC Power:
  • Input: 100-240V ~ 0.5A Max, 47-63Hz
  • Output: 15V - 0.8A

Cartridge Specs:

• Frequency Response: 20-20kHz (+/-3db)
• Channel Balance: 2dB @ 1kHz
• Channel Separation: 20dB @ 1kHz
• Sensitivity: 5mV (+/-2dB), 1kHz @ 5cm/sec
• Static Compliance: 16mm/N
• Equivalent Tip Mass: 0.7 mg
• Vertical Tracking Angle: 26 degrees
• Stylus Radius: Elliptical .0007" x .0003"
• Stylus Type: Replaceable
• Load Resistance: 47,000 Ohm
• Load Capacitance: 150-400 pF
• Internal Inductance: 560 mH
• Internal Resistance: 700 Ohm
• Cartridge Weight: 4.2g
• Fixing Center: 0.5" (12.7mm)
• Playing Weight: 1.5-2.0g (1.75g nom.)