1997-2001 BMW 323i Radio Install Stereo Dash Kit: Harness & Ant. Adapter 323Kit |
Every Bid is an Instant Winner
1997-2001 BMW 323i Radio Install Stereo Dash Kit: Harness & Ant. Adapter 323Kit Install Dash Faceplate Kits / Dash Kit for Stereo Installation Auto makers factory radio is usually different shaped & sized.
- Mount Aftermarket Radios into the opening where the OEM radio was.
- Install Dash Kits Convert size differences between : OEM stock radios & Aftermarket Replacement
![](https://i.ebayimg.com/00/s/NTY3WDc3Ng==/z/6uAAAOSwg2lgi2a-/$_57.jpg) Installation Kit Features:
WORKS WITH THESE MODELS BELOW ONLY:
Car Stereo Dash Kit trim bezel + Radio Wire Harness + Antenna FM Adapter
Textured ABS plastic. / Perfectly matches dash contour.
ONLY SINGLE DIN MOUNT INSTALLATIONS
E-Z to install bolts securely into place using factory hardware.
FITS ONLY MODELS BELOW
2001 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
2000 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
2000 |
BMW |
323i |
Base Wagon 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1999 |
BMW |
323i |
Base Convertible 2-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1999 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1998 |
BMW |
323i |
Base Convertible 2-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1998 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1997 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
FAQ (about Installation Parts) |
Frequently Asked Questions If my Vehicle is Listed; do I really need this? YES (its a good idea) Do I need Any other Additional Parts? Most likely a wire harness and antenna adapter will be also needed. HOW DO I FIND OUT?
Easy to find by checking the Search Box in our ebay store by typing in Make Model Year of your Vehicle.
HOW DIFFICULT IS IT TO INSTALL? Usually with some patience most installs can be done with simple tools and take approx. 30min to 3hrs (It depends on how many parts of your dash needs to be removed, and if your installing additions like Amp, etc. | |
Dash Kit ( Why its a Good Idea ) |
Why do I need a Dash Kit? Today's cars have rounded edges, sometimes funky looking convex and curved stereo faces.
Dash Kits are designed to match your car radio console. For a Gapless fit with Aftermarket Radios. Many auto makers factory radios are bigger than aftermarket radios (Some will need a Pocket or Delete Plate) (Read Below) **
The sole purpose of an install dash kit, is to blend the new aftermarket radio so it looks like it belongs. Professional Install shops use these very same Dash Kits when installing new Aftermarket Car Stereos
Radio in-dash installation kits are designed, specifically for particular vehicles
* EXAMPLE : AFTERMARKET RADIO IS A SINGLE DIN & OEM RADIO WAS LARGER SIZED 2 DIN (DEFINITELY WILL NEED DASH KIT - if wanting to close up the gaps) What is a Single-DIN, 1.5DIN, Double-DIN & Shaft Radio Mean? "Single DIN" = Standard Aftermarket Radio Size "Shaft Style"= Old type of radios w/ Knob Controls 1.5 DIN = Mostly Used by GM (in the Late 90's - early 2000's) 2 DIN = Many Stock Import Radios - 2xs size of Single DIN (often referred to as a Double Din) | |
Careful of Direct Imports from China & Abroad |
Unfortunately there are a lot of Cheap Stereos being sold on ebay, that do not fit the AIAA Standards. Many China radio models will not work with this kit: (Stick with Brand Names) just to be on the safe side.
Why? Because they make their 7in screens to fit into locations that do not require a fitment dash kit. Not only are they oversized, some have Odd Wiring; and don't follow the 35yr old EIA color code. Don't have detailed info from the Manufacturing Companies who make the vehicles. Companies like Alpine, Clarion, Kenwood, Pioneer (except some *AVIC), JVC all fit; due to industry collaboration. Morotorized flip screens have similar Issues* Please Double Check the size of your aftermarket radio before purchasing this kit.
Boss and Eonon radios are notorious for being over-sized, please be cautious when purchasing these radios. There is Not a Dash Kit on the market that will accommodate these oversized Non Branded Radios. In essence, you get what you pay for, and unfortunately it becomes everyones problem on their attempted profit.
Double Din kits are design for use with USA Standard Double Din radio models only that are 6.2" 173mm x 99.8mm to 7" 180mm x 102mm (anything over 180mm will need to be trimmed) | |
Its Doesn't Fit |
Don't Panic... First, make sure you have a named brand Radio. ( as discussed above ) Secondly, there are a few reasons for this lovely and frustrating scenario Please look and read the directions carefully, and then recheck the directions. Some Radios slide in from front, and use the Metal Box, while others are ISO and slide in from back to front. Usually ISO, the box isn't needed, and you'll attach the stereo to the side brackets of the Dash Kit. (We've doing this since the early 80s) - & still sometimes laugh at myself, because I didn't read the directions. | |
Will I need anything else? |
Maybe; an Aftermarket Radio Wire Harness & Antenna Adapter (to keep FM Radio) As earlier mentioned about Wire Harnesses being incorrectly wired from China... (this is on them) not us. We Stock the same Professional Radio Wire Harnesses and Antenna Adapters, you'd pay for at any install shop. (in-fact) we are installers, we carry what we install and have knowledge of what we sell. To check what type of Radio wire harness you may need, look in our ebay store for your Make Model Year. if it lists parts, then you will need them, if you don't want to cut up your vehicle harness. (for Stereo replacement) usually 3 things are needed. 1) Dash Fitments for Radio 2) Aftermarket Stereo Wire Harness 3) Antenna Adapter | |
Do I need to re-wire things? |
No Re-wiring is needed, unless you have gotten a non-branded stereo. FAQ: Why do I need a wire harness? Simple it saves you time, headaches, and keeps your vehicles factory warranty EIA color Coded (Name Branded radio and harness; simple color match) No Splicing Required
How does it work? Basically Plug N Play Simply start by plugging the plastic end into the wiring harness plug of your car Then the other end with (the wires) goes to the wiring harness of the New or Factory stereo Easy E.I.A color coded (Just match up colored wires to each other) | |
Why do I need Antenna Adapter? |
Well, if you want to keep your AM/FM Radio working, this part is very important. (Not all vehicles require an Antenna Adapter) - Type in your Make Model Year of vehicle. IF your vehicle is listed, then it will be a required part to keep your radio stations.
How do you install this? Easy, all you need to do its connect one end into your (Factory antenna plug that came out of your stock Radio) Then, you connect the other end into the aftermarket radio. (as long as your antenna is still factory) this is all that is needed. (if you are interested in adding aux-inputs) then you would need to get an FM Modulation Box, and look for the FM Modulation wire set, we sell. | | |
|
1997-2001 BMW 323i Radio Install Stereo Dash Kit: Harness & Ant. Adapter 323Kit
Car Stereo Dash Kit trim bezel + Radio Wire Harness + Antenna FM Adapter
Textured ABS plastic. / Perfectly matches dash contour.
ONLY SINGLE DIN MOUNT INSTALLATIONS
E-Z to install bolts securely into place using factory hardware.
FITS ONLY MODELS BELOW
2001 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
2000 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
2000 |
BMW |
323i |
Base Wagon 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1999 |
BMW |
323i |
Base Convertible 2-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1999 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1998 |
BMW |
323i |
Base Convertible 2-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1998 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
1997 |
BMW |
323i |
Base Sedan 4-Door |
2.5L 2494CC 152Cu. In. l6 GAS DOHC Naturally Aspirated |
![Powered by SixBit]( https://www.sixbitsoftware.com/images/tagline.jpg)
Powered by SixBit's eCommerce Solution