Extra Long Drill, 10.00mm, HSS

Roll over image to zoom.

WALTER TITEX

Extra Long Drill, 10.00mm, HSS

  • Mfr. Model #A1622-10


Country of Origin France. Country of Origin is subject to change.

These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.

Technical Specs

  • ItemExtra Long Drill Bit
  • Drill Bit Size10.00 mm
  • Decimal Equivalent0.3937
  • Measurement SystemMetric
  • Material - MachiningHigh Speed Steel
  • Finish - MachiningBright (Uncoated)
  • Drill Bit Point Angle130 Degrees
  • Drill Bit Point TypeConventional Point
  • Flute TypeParabolic
  • Number of Flutes2
  • Flute Length7 9/32 in
  • Maximum Drilling Depth7 9/32 in
  • Cutting DirectionRight Hand
  • Shank Type - MachiningStraight
  • Shank Dia.10.00 mm
  • Shank Length80.00 mm
  • Overall Length265.00 mm
  • Depth:Dia. Ratio16xD
  • Drill Length ClassExtra Long
  • Drill Point Length2.33mm
  • Coolant FedNon-Coolant Through
  • Drill Bit GroupingIndividual
  • SeriesUFL
  • StandardsDIN 1869 R1
  • Drill Diameter ToleranceH8
  • Sheeter DrillNo
  • Material Grade - MachiningGeneral Purpose
  • Primary Material ApplicationAluminum, Brass, Bronze, Cast Iron, Copper, Steel
  • Primary Material Application ISO CodeK, N, P
  • Secondary Material ApplicationComposite, Nickel, Stainless Steel, Titanium
  • Secondary Material Application ISO CodeM, O, S