Country of OriginFrance. Country of Origin is subject to change.
These drill bits come in standard sizes expressed in millimeters. Parabolic-flute drill bits have wide, deep flutes that improve chip flow and heat dissipation, which means feed rates do not need to be reduced as the drill moves deeper into the workpiece. The bright finish on these drill bits is not affected when their cutting edges are resharpened. The bits do not have coolant holes, so a separate hose is required to bring coolant to the bits' tip if it is needed.
Technical Specs
ItemExtra Long Drill Bit
Drill Bit Size10.00 mm
Decimal Equivalent0.3937
Measurement SystemMetric
Material - MachiningHigh Speed Steel
Finish - MachiningBright (Uncoated)
Drill Bit Point Angle130 Degrees
Drill Bit Point TypeConventional Point
Flute TypeParabolic
Number of Flutes2
Flute Length7 9/32 in
Maximum Drilling Depth7 9/32 in
Cutting DirectionRight Hand
Shank Type - MachiningStraight
Shank Dia.10.00 mm
Shank Length80.00 mm
Overall Length265.00 mm
Depth:Dia. Ratio16xD
Drill Length ClassExtra Long
Drill Point Length2.33mm
Coolant FedNon-Coolant Through
Drill Bit GroupingIndividual
SeriesUFL
StandardsDIN 1869 R1
Drill Diameter ToleranceH8
Sheeter DrillNo
Material Grade - MachiningGeneral Purpose
Primary Material ApplicationAluminum, Brass, Bronze, Cast Iron, Copper, Steel
Primary Material Application ISO CodeK, N, P
Secondary Material ApplicationComposite, Nickel, Stainless Steel, Titanium