Universal aftermarket (STEUERGERÄT) for Webasto Thermo Top Z/C/E/P ECU, benzin / gasoline
It can control both circulation pump and interior fan also.
Easy installation, no need of programming -> so PLUG & PLAY!
You can run diagnostic with Webasto thermo test software -> you need to select "W-bus" in the Thermo Test program!
Please email me for the download link of the software + manual. For PC connection, you have to have any (aftermarket) USB to KK-L adapter (like OBD, pin7)!
First of all, we ship worldwide (10 euro), except Hungary! If you can't complete the purchase, please wait until I send the invoice with the 10 euro shipping cost.
If you are not familiar with heater repair or installation, please ask me before installing the controller! I will gladly help you, it's not a problem! (see my feedback please)
BUT:
If you already installed the controller board, and your heater is not starting, or you have any other problem with it: PLEASE RUN DIAGNOSTIC with WEBASTO THERMO TEST software as "Wbus heater", before contacting me!
I CAN HELP IN ENGLISH or HUNGARIAN LANGUAGE ONLY!
Other words:
I can't help, if you do not have at least: OBD (KK-L) diagnostic cable & diagnostic software, a digital multimeter, and if you can't speak english! (please do not use google translator)
In a regular season I help about 100-150 satisfied buyer via email. I hope you understand, it takes a lot of time. But unfortunatelly some impatient & incompetent buyers begins their emails as: "My heater does not start. Tell me, what can I do, otherwise I will send back the controller!" - Sorry, I'm not a part rental!
Because of the returned controllers fault rate is about 1%(!) (so, when I got back really faulty controllers), and I need to pay the return shipping...
THEREFORE
If you have a Thermo Top E 4kW heater, and you use this controller, your heater performance go up to 5kW, like Thermo Top C !
WIRING:
PIN1: Start (+12v)
PIN2: Diagnostic, as Wbus heater (!)
PIN3: Start (+12v)
PIN4: Interior fan controlling (switch on at 40°C)
PIN5: Not used
PIN6: Fuel pump
*
If the coolant temperature reaches 76°C, heating power reduces to ~50% capacity.
If the coolant temperature gets lower than 56°C, the capacity rises up to 100%.
The heater will switch off, if the coolant temperature reaches 80°C .
Starts on 12V start signal and works until the coolant temperature reaches 80°C or detects any operational problem.
Voltage tolerance: 10V minimum (10 sec), 15,5V maximum (3sec)
Standby current <2mA (in sleep mode)
It has all safety control functions (for example: flame monitoring, checking of continuous ventillating, temperature monitoring and so on).
Universal, so it does not start from Wbus. Wbus PIN (PIN2) is restricted for diagnostic only! If you use Telestart (T91.example), 1533 "oval" timer -> use the analog output, and connect to the PIN1 on my board)!
You could start it with any external timer, RF remote (for example Telestart) or a control panel which gives more than 10V continuously (any switch or timer) for starting.
Attending documentation contains all of the information you need to diagnostic, outfit, stripping (PDF-EMAIL).
We grant 2 years of warranty.
Warranty void in case of liquid damage (fuel, water, etc.) or visible repair attempt.
Questions will be answered ASAP. Sorry, we speak english and hungarian only.
PayPal and IBAN transfer accepted.
Shipping expenses (with charging) is assumed to the buyer, but we always serve by the lowest possible postage prices.
Returns & Exchange policy:
Product must be sent back in the same condition as received. Broken, damaged, dirty, painted, wet or oxidized by coolant, water or fuel: no returns accepted! In this case: NO refund!
RETURNS and/or REFUND IS NOT APPLICABLE, until you do not send screenshots, video or information from the WEBASTO THERMO TEST SOFTWARE about the heater's working parameters and/or fault list!
No refund applicable, if you do not contact me before ship back the item.
The seller is not responsible for the technical incompetence of the buyer!
Product must be returned within 15 days for REPLACEMENT.
Return shipping costs must be paid by the buyer, no exclusion.