Features:
1.LED light curing machineadoptsthe light-emitting diodes Blue-ray, it cancure the resin with the wavelength of 420-480nm, and be used to repairthe teeth in the department of stomatology;
2.There are three solidification working light modes: strong light mode, flashing light mode, gradual light mode.
3.The light-emitting diodeshas long life, which can greatly reduce the costs of future maintenanceof the machine;
4.Its does not produce any heat when running, so no needto cool it with fan, thus, it is free from the annoyance of noise andvibration of traditional machines;
5.Thehigh capacity lithium ion batterycan lastabout130-200 times after being fully charged(4-8 hours).
6.Intelligentbattery detection circuit function:when batteryis low, itwillalarm and the light will flash.
7.Lightweight and two-stage design, first low-lightirradiation, and then glare rapid curing.
8.This can inhibit the excessive contraction of the resin surface, avoidcracks between cavities edge.
Operation
1. You can set working modesand working time(5s-40s)on this machine .
2. working time setting
Press the"M" button for a while, when hear"di di"and light shine,press"P" button to choose the time, 5s- 40s is available. Whenyouhear "di di" againand light stopping shinning,thetime setting is done.
3. Working mode setting
Press button "M"to choose working modes, choose the mode you need.
Technical data:
Battery voltage: 3. 7V
Package:230×172×53mm
Suitable temperature:5℃~50℃
Gross Weight: 0.57Kg
input Voltage: 110V-240VAC, 50-60HZ
Relative humidity: < 80%
Solidify time and depth 5s/3mm
Output Voltage: DC4.2V
Light wavelength: 420-480nm
Battery: Lithium-ion battery
Capability of Battery: 1500mAh
Light intensity: 1200-2000mw/cm²
Package list:
1* Working Head
1* Main Body
1* Light Protector
1* Charging Base
1* Adapter
1* User Manual