Need a compatible RGBW Strip. Click here to see our product
Apart from the traditional RGB channels it also supports the white light channel which allows you to add pastel colours to your lighting decorations.
The FIBARO Z-Wave RGBW Controller 2 also has four analogue inputs supporting any type of Fibaro sensor (e.g. light sensors, wind sensors, pressure sensors and potentiometers operating between 0-10V). This smart feature allows you to use your lighting as a warning for certain events. You could, for example, set your RGB garden lights to turn red and flicker when one of your security sensors is triggered, alerting your neighbours to the intruder and allowing them to notify the proper authorities.
This device has four output channels which means that you can connect and independently control up to four light sources. The FIBARO Z-Wave RGBW Controller 2 also allows you to monitor the energy consumed by the LED strips. Each of the four channels can be monitored independently providing you with all the information you need to minimise your energy bills.
The FIBARO Z-Wave RGBW Controller 2 can control:
Note: Power supply is not included.
This product integrates with all Australian certified (921.42 MHz) Z-Wave controllers including:
The FIBARO Z-Wave RGBW Controller 2 is compatible with the DHS RGB LED Strip which is also available.
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera's user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device's user manual. In most cases your device's default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please check the maximum load before installing or operating.
This device must be installed by a certified electrician.
For all warranty claims, an electrical compliance certificate from your electrician must be provided.
Manuals:
FIBARO Z-Wave RGBW Controller User Manual
Videos / YouTube:
FIBARO Home Center 2 Presentation
RF Protocol
|
Z Wave
|
RF Frequency
|
921.42Mhz AU/NZ approved RF for Z wave
|
Z Wave device type
|
Z-Wave dimmer
|
Power
|
12V and 24V
|
Operation Range
|
Up to 50m outdoors, up to 30m indoors (depending on terrain and building structure)
|
Application
|
Controlled automatically by pre-set Fibaro devices or manually using any Z-Wave controller
|
Operation temperature
|
0 ~ 55 oC
|
Storage temperature
|
10 ~ 80 oC
|
Weight
|
50g
|
Housing
|
ABS
|
Compliance
|
EN 55015, EN 60669-2-1
|
Regulatory Compliance Mark
|
N5496
|
SHIPPING
We use Australia Post! Items are typically shipped the same if ordered before 11am or the following day from our warehouse in Sydney, Brisbane or Melbourne.
You can choose:
Free shipping if over a certain value using Sendle
Australia Post Standard $9.99
Australia Post Express $15
Startrack Premium for $20.
New Zealand we charge a flat rate of $23
International shipping we charge $50.
For shipping times please refer to the Australia Post website.
We cannot guarantee delivery times as the operations of couriers are not within our control. Delivery times change depending on the time of year and the courier's website should be consulted for reference. We ship most of the orders from Melbourne.
We are committed to being a sustainable company and always choose the most sustainable ways of running the business this is why we have chosen a carbon neutral delivery service and we only use satchels that are biodegradable or recycled cardboard boxes.
DO NOT leave messages to couriers as we cannot guarantee any messages will be accepted and followed by them.
FAULTY ITEMS
All our products carry a 12-month guarantee if you have any problems with any of our goods within the guarantee period.
Please get in touch with us to apply for a refund or exchange.
support@ozsmartthings.com.au
Payments are due Immediatly
Since 2017, we have been working to create a platform that brings Australians the best range of products in the Home Automation ever innovating field. We love how technology can transform our daily lives, and this market will have as many users as smartphones in the future. We are excited to be part of the beginning of Australia's path down that road!