Complete with soft comfortable 3D Air Mesh seat cushion (mat) and  headrest.

SEAT DIMENSIONS according to the rider's height:

160-173cm / 5'3'' - 5'8'' - S

170-180cm / 5'7" - 5'11'' - M

175-190 cm / 5'9" - 6'3" - L

Installation angle range relative to the horizon: 27º-45º !!!

WEIGHT:

Size S: 1.3kg (2.8lbs)

Size M: 1.4kg (3lb)

Size L: 1.5kg (3.3lb)

SIZE:

S 32 \ 22 \ 27 \ 77cm = 12.6 "/ 8.7" / 10.6 "/ 30.3"

M 32 \ 22 \ 27 \ 82cm = 12.6 "/ 8.7" / 10.6 "/ 32.2"

L 32 \ 22 \ 27 \ 88cm = 12.6 "/ 8.7" / 10.6 "/ 34.6"

All seat sizes are the same width of 32 cm/12.6” (widest) and the same height of 22 cm/8.6“ (highest).

Anatomic Shape seat ribs are 55mm high. If you are not sure if you can fit a seat with these stiffeners to the frame. Choose the Sunrider Modified Seat (https://www.ebay.com/itm/165442930812) only if you are less than 185cm and 6ft 0.8346 "tall.

The latest seat model has no stiffeners, but it would be easier to install.

ATTENTION !!!

If your bike / trike has a plastic seat (and not a metal frame with a mesh in between), this means our seat can fit.

In this case, there must be an original mount from the original bicycle / trike seat (which, for example, could be removed

from an old or broken seat).

The mount can be attached to the seat, but you must first drill holes in the seat where you want it.

If the original bike / trike seat is a mesh on a metal frame (such a seat can also be part of the trike frame),

then a special bracket (adapter) is required for our seat. These adapters are not actually on the market right now,

so you can create them yourself. And this is the real state of affairs.

DEAR BUYER! We ship worldwide. But please note: due to customs regulations, you may be subject to customs duties. (CHECK LOCAL PRICES)