eBay

1000W 3 Phase Wind Turbine Grid Tie Inverter with Limiter Sensor DC22-65V AC220V

Note: For EU countries, we will send the package from the German warehouse.

The test point should be at the DC side of the built-in rectifier of the inverter, but you can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 22~65V, then the wind turbine's output AC range of the should be 22/1.732~65/1.732 = AC12.7V~ 37.5V.

This model grid tie has designed for wind turbines that put out 3 phases AC voltage. It can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can’t keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

Wind Grid Tie Inverter with Limiter Sensor, which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.

The backlit LCD display gives you a clear picture of the inverter's operating status.all adjustable parameter.The status of errors will be displayed with red letters on the grid tie inverter LCD display.

Easy installation,Can be paralleled on AC side.Overload protection ,Anti-island protection,Short-circuit protection/Reverse polarity protection.

We call a system combining with a small grid tie inverter and a wind turbine as "SGWT". The small type of wind grid tie power inverter can obtain the wind energy from wind turbines and tie to the grid through its output cables with no extra equipment. Plug and Play.

The inverter can be connected to any outlets of the utility grid at the house. The small grid tie inverter monitors the volume, frequency, and phase of the home utility grid, producing pure sine wave AC power that the frequency and phase are the same as the grids. The small grid tie inverter puts out power when the home grid is on.When the AC wind turbine is rotating, and its output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produce power, and the grid tie inverter will change the power from the wind turbine to the home grid. When the total power of the electric appliance that is using in the house is larger than the output power of the inverters, this power from the inverters will be consumed in the house. This will slow down the power meter; otherwise, the difference of the output power of the inverter between the total used power of the appliance will go out from the house to the out grid.

NOTE: Any DC power input is prohibited.

The Advantage of Inverter:

1. Directly connect to three phase wind turbine（24V AC Wind Turbine Generator）

2. Plug and play, easy to install.

3.Can be paralleled on AC side

4.built-in dump Load controller

5.Support WIFI communication. (Need to purchase additional WIFI module)

6. Each inverter need to pass twice testing (20 hours) before leaving factory.

7.Overload protection,Anti-island protection,Short-circuit protection/Reverse polarity protection

8.Wind Turbine Voltage Range:AC12.7V-37.5V

9. 1 year warranty, lifetime technical support.

How to choose the correct wind AC output voltage?

You can calculate from 3 phases of AC output voltage of the wind turbine to get the DC voltage, the formula is Vac = Vdc/1.732. For example, if the DC input voltage range of the inverter is 22~65V, then the wind turbine's output AC range of the should be 22/1.732~65/1.732 = AC12.7V~ 37.5V.

Built-in dump Load controller:

Technical Data:

Model:SUN-1000G2-WAL-M

Max. Power Output:1000W

Input AC/DC Voltage Range:22-60V

AC Output Voltage Range:90-260VAC

Output Frequency:46Hz~65Hz

Standby Power Consumption:<0.5W

Total Harmonic Distortion:<5%

Peak Inverter Efficiency:92%

Power Factor:0.99

Output Wave Form:Pure Sine Wave

MPPT Efficiency:99%

Over Current Protection:Yes

Over Temperature Protection:Yes

Reverse Polarity Protection:Yes

Anti-Island Protection:Yes

Stackable:Yes

Certification: CE,VDE

Applied Standards:VDE-AR-N 4105:2018-11;DIN VDE V 0124-100:2020-06

Weight ( Kg):5.82KG

Dimensions (W x H x D):322*196*88mm

authentication：

①. ②. Dump load resistor connection Terminal. This terminals will connect to the dump load resistor.

③.AC socket,This socket will connect the inverter to the public grid via the AC cable.

④.Cooling fans.

⑤.Input Terminals. This terminals will connect to the wind turbine.

Inverter Display Instruction：

The Inverter display can show many information,The main interface of the display and the icons explainations are show above.

Set Menu: Choose the set menu icon on the main screen interface,click the confirm button to enter into the interface show below,In this interface,can set the LCD backlight always on or auto turn off backlight after 3 minutes no action.

The inverter also integrate with internal limiter and external limiter function which can prevent excess power from going to the public grid.Select the internal limiter mode,inverter will work under limiter mode,output power of the inverter will be determined by load power.

Notes:Save the setting after you reconfigurate the working mode or backlight setting.

Installation Procedure：

Installing Sunshine Grid Tie Power System involves several key steps:

1. Considering the total capacity of the grid tie power system that you need.

2. Choosing applicable wind turbine for Sunshine Grid Tie Inverter.

3. Selecting accessory for installation of the Grid Tie Power System .

4. Selecting correct model of Sunshine Grid Tie Inverter.

5. Installing wind turbine to suitable place.

6. Installing Sunshine Grid Tie Inverter to suitable place.

7. Connecting Sunshine Grid Tie Power System with cables and connectors.

8. Grounding the system.

Three Phases Grid Tie Power System:

For example, installing a 3KW grid tie power system to three phase utility grid.The diagram is shown in Fig. 8, we seperate 3KW power sytem to three power system units,every unit has 1KW power. Connecting every system unit to different phase, this canbalance all grid tie power to three phases of the utility grid.Fllow this way, you can install more large grid tie power system to three phases, justseperate the whole power system to three equal power system units

Y&H machine certification, safer and more compliant:

Grid Tie Inverter

Shipping Policy:

1. Items are usually shipped 1-3 business days after payment has been received.We do not ship on weekends and holidays

2.Sellers are not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.

3. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive the item after 30 days, please contact us, we'll investigate and solve the delivery problem.

4.International buyers are responsible for duties and customs fees.We are not responsible for any customs duties or import taxes (if any)

5.Buyer from remote area should pay 35 USD more for the remote delivery service.(Only for Business Express )

Payment Method:

1. Payment methods accepted : Paypal only.

2. All major credit cards are accepted through our secure payment processor PayPal.

3. Payment must be received within 4 business days of auction closing.

4. We only ship to the confirmed address provided by ebay. Before you pay, please make sure your address in ebay matches the address you would like us to ship to.

Returns Policy:

1.One Year Warranty. Buy with confidence!

2. Refund or replacement request is available only requests within a week after parcel received & returning the item as the same condition as received.Please include your eBay ID and brief description of defective problem in your return package.

3. Defective situation must be noticed within 7 days after delivery.

4. Buyer must pay the return postage for any return reason.In return,we will pay the shipping fee for send it back to you.

5.Replacement or refund will be issued after the items are recevied by us in good condition.

Feedback:

1.We maintain all excellence 5 star DSR and strive for 100% customer satisfaction! Feedback is very important to us.

2.Please do not give us any bad feedback. Or contact us before you open a case. If you can do as we say, we will be very grateful.Please give us the opportunity to resolve any problem.

Duties:

1.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's' customs office to determine what these additional costs will be prior to bidding/buying.

2.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up, do not confuse them for additional shipping charges.

3.Custom holds and delays vary from country to country and are beyond the control of the seller. Please do not hold us responsible for delivery delays caused by customs related issues. Thank You! DataCaciques