prod image 1
prod image 2
prod image 3
prod image 4

Adventure Kings 12v Control Box 5x 16A switches + 1.8m 12v Fridge Cable Anderson


 

12V Control Box

 

This is the Adventure Kings 12V control Box – a feature packed bit of gear that will make anyone’s 12V setup better! If you’ve been dreaming of an epic camping 12v system, then this is the bit of gear you’ve been waiting for. An ultra-premium quality product, without the premium price tag!

First, the box itself is built with laser cut 1.5mm powder coated aluminium and the lid is 2mm thick for strength. Coming in at 400mm by 305mm and 80mm deep, it’s compact enough to fit just about anywhere while still providing plenty of room for all the switches, wiring and 12v gear.

Going from the outside in, there’s a grommet on each side which makes it easy to position and wire this up, no matter where you want to mount it.

On the front you’ll notice the space at the top left, along with the extra grommet – this space is designed so you can mount a DCDC charger directly onto the box – feed the wiring through the grommet and you can wire up to the internal posts for an all-in-one install.

Next up there’s an easy to access fuse holder – these fuses run the switches, plugs and sockets that run along the bottom of the control box.

From left to right you’ve got 2 quick connect plugs – the first can be easily configured as a solar input for your DCDC charger. Then there’s a voltmeter, three 20A-rated cig sockets and a double USB socket with 1amp and 2.1amp USB connections.

Above that you’ll see 5 x 16Amp rated rocker switches – these are pre wired with fused power so you can easily switch any added accessories and circuits on and off. You even get a sheet of pre-labelled stickers to customise your setup for your own needs!

The face screws off and inside you’ve got a negative bus bar and negative M10 binding post as well as two positive binding posts for your starter and auxiliary batteries. That means wiring up both batteries for a dual battery system is easy!

With heavy duty wiring the Adventure Kings 12V control box is ready to go – all you need to do is add fused power from your battery. Plus because it uses ring and spade terminals, it’s easy to modify, upgrade or update the whole setup as you go. Whether it’s changing the quick connect plug to become your DCDC charger’s solar input, or using the switches to trigger relays and run all your vehicle’s camp lighting and 12V accessories.

The Adventure Kings 12V control box will take your 12V setup to the next level – whether you’re using it as a power hub directly off your deep cycle battery, or connecting a dual battery system complete with a DCDC charger.

Kings 1.8m 12v Fridge Cable Anderson-Style Plug C11 Connector to Suit Kings & Many Other 12v Fridges 14AWG Cable

Whether you need a quick, reliable replacement for your damaged or broken fridge cord, or you want to upgrade to prevent voltage drop or accidental disconnection while travelling, the Kings 1.8m Fridge Cable with Anderson-Style Plug is the perfect solution!

This ultra-tough cable measures 1.8 metres long, and is made with extra-thick 14AWG cabling – that’s thicker than most other competitors’ replacement fridge cables, to prevent voltage drop and ensure your camping fridge always gets full power.

On one end is a C11 plug, which suits all models of Kings camping fridges, plus many other camping fridges on the market. On the other end is a quick-connect fitting that plugs straight into a Kings battery box or any other Anderson-style plug, for firm, positive connection that simply won’t wiggle free no matter how rough the road you’re travelling down.

And here’s a huge benefit this cable has over the competitors – an in-line waterproof fuse holder with 15A blade fuse. Cigarette style fridge plugs have a glass fuse built into them, and many other competitors don’t bother offering an inline fuse when they offer a fridge cable with Anderson-style plug – but unfused electrical circuits create a potential hazard!

Get your fridge running better than ever with the Kings 1.8m Fridge Cable with Quick-Connect Plug.

"

12V Control Box

Box Material:

Black powder coated laser cut aluminium

Box Size:

400 x 305 x 80mm

Weight:

2.74kg

Lid Thickness:

2mm

Box Thickness: 

1.5mm

DCDC Charger:

Provisions for CTEK D250SA or Kings DCDC Charger 

Coating:

Black Powder Coating

Recommended Fuse Size for Batteries: 

40A (Input cable from vehicle’s battery needs to be fused as close as possible to the battery using a 40A inline fuse or circuit breaker)

Recommended Cable Size for Batteries Depending on Length:

0-1m = 8 Gauge Battery Cable

1-3m = 6 Gauge Battery Cable

Cable Length:

1800mm

Fridge Connector:

C11 (to suit all Kings & many other brand 12v fridges)

Power Connector:

50A Anderson-Style

Wiring:

14AWG

Fuse:

Included 15A blade fuse, water-resistant fuse holder