DC12/24V 3W Solar Photovoltaic Water Pump For Aquarium Fountain Pond Tea Set
Popular
Product Introduction
DC12V 3W 1020 Solar Pump
Feature
1. High-performance and durable stainless steel shaft, the shaft sleeve magnet is connected into a whole by injection molding to avoid wear and tear and greatly improve the life (up to 10 years without maintenance);
2. The stator part is completely isolated from the rotor part of the pump, the stator and circuit board parts are epoxy potted, 100% waterproof; 2 Can use water and land!
3. Part of the permanent magnet rotor, using environmentally friendly materials, low noise (less than 35 decibels), low power consumption, small size and high efficiency pump body;
4. All the parameters required can be adjusted by the stator winding and can be operated in wide voltage, for example, 6. It can modulate 1M 12V elevators and also 1.8M elevators;
5.Pump suction cup fixing base
Feature
1. High-performance and durable stainless steel shaft, the shaft sleeve magnet is connected into a whole by injection molding to avoid wear and tear and greatly improve the life (up to 10 years without maintenance);
2. The stator part is completely isolated from the rotor part of the pump, the stator and circuit board parts are epoxy potted, 100% waterproof; 2 Can use water and land!
3. Part of the permanent magnet rotor, using environmentally friendly materials, low noise (less than 35 decibels), low power consumption, small size and high efficiency pump body;
4. All the parameters required can be adjusted by the stator winding and can be operated in wide voltage, for example, 6. It can modulate 1M 12V elevators and also 1.8M elevators;
5.Pump suction cup fixing base
Specification
Model DC-1020
Person in charge: 150CM
Flow: 200L/H
Power: 1-3W
Voltage: 12V
Wire source: 1.5M
Size: 39*38*28mm
Model DC-1020
Person in charge: 150CM
Flow: 200L/H
Power: 1-3W
Voltage: 12V
Wire source: 1.5M
Size: 39*38*28mm
DC 24V 3W Solar Pump
Feature
1. Using high-quality materials, the quality is guaranteed
2. The electronic components are used for commutation, and there is no need to use carbon brushes for commutation
3. High-performance wear-resistant stainless steel shaft is used, and the shaft sleeve is integrated with the magnet through injection molding to avoid wear and tear, and the service life is greatly enhanced (up to 10 years without maintenance)
4. The stator part and rotor part of the water pump are completely isolated, and the stator and circuit board parts are encapsulated with epoxy resin, which is 100% waterproof; it can be used for both land and water!
5. The rotor part adopts permanent magnet, the water pump body adopts environmental protection material, low noise (less than 35dB), small size, high efficiency and low power consumption;
6. Various required parameters can be adjusted through the winding of the stator, and it can be operated with a wide voltage. For example, 12V can modulate 1M head, or 1.8M head;
Feature
1. Using high-quality materials, the quality is guaranteed
2. The electronic components are used for commutation, and there is no need to use carbon brushes for commutation
3. High-performance wear-resistant stainless steel shaft is used, and the shaft sleeve is integrated with the magnet through injection molding to avoid wear and tear, and the service life is greatly enhanced (up to 10 years without maintenance)
4. The stator part and rotor part of the water pump are completely isolated, and the stator and circuit board parts are encapsulated with epoxy resin, which is 100% waterproof; it can be used for both land and water!
5. The rotor part adopts permanent magnet, the water pump body adopts environmental protection material, low noise (less than 35dB), small size, high efficiency and low power consumption;
6. Various required parameters can be adjusted through the winding of the stator, and it can be operated with a wide voltage. For example, 12V can modulate 1M head, or 1.8M head;
Specification
Voltage frequency: DC12V~24V
Power: 3W
Lift: 1.5 meters
Flow: 200L/H
Outlet diameter: about 8mm outer diameter
Line length: 1.5 meters
Voltage frequency: DC12V~24V
Power: 3W
Lift: 1.5 meters
Flow: 200L/H
Outlet diameter: about 8mm outer diameter
Line length: 1.5 meters
Instructions for use:
1. Overpressure operation is strictly prohibited. It is strictly forbidden to exceed their respective maximum voltages. If the battery is fully charged, if there is no voltage limiting measure, it will cause serious overvoltage. If you cannot guarantee your own power supply voltage, please test it first.
2. Do not use AC power supply, router power supply, computer cat power supply and many other similar ones are AC and cannot be used!
3. Ripple problem (the most prone to problems): Many DC transformers are half-wave rectifiers. As a result, a lot of AC components are mixed in the DC, and the water pump will be broken! Brushless water pumps must be full wave rectified!
4. Lift problem: For example, the lift of 2.2 meters does not mean that the power can be sprayed to a height of 2.2 meters. The lift refers to the vertical height of the water column in the water pipe after the nozzle is connected to the water pipe. The injection height is much lower than the lift!
1. Overpressure operation is strictly prohibited. It is strictly forbidden to exceed their respective maximum voltages. If the battery is fully charged, if there is no voltage limiting measure, it will cause serious overvoltage. If you cannot guarantee your own power supply voltage, please test it first.
2. Do not use AC power supply, router power supply, computer cat power supply and many other similar ones are AC and cannot be used!
3. Ripple problem (the most prone to problems): Many DC transformers are half-wave rectifiers. As a result, a lot of AC components are mixed in the DC, and the water pump will be broken! Brushless water pumps must be full wave rectified!
4. Lift problem: For example, the lift of 2.2 meters does not mean that the power can be sprayed to a height of 2.2 meters. The lift refers to the vertical height of the water column in the water pipe after the nozzle is connected to the water pipe. The injection height is much lower than the lift!
List
1 x Water Pump
1 x Water Pump
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
DC12/24V 3W Solar Photovoltaic Water Pump For Aquarium Fountain Pond Tea Set
Product Introduction
DC12V 3W 1020 Solar Pump
Feature
1. High-performance and durable stainless steel shaft, the shaft sleeve magnet is connected into a whole by injection molding to avoid wear and tear and greatly improve the life (up to 10 years without maintenance);
2. The stator part is completely isolated from the rotor part of the pump, the stator and circuit board parts are epoxy potted, 100% waterproof; 2 Can use water and land!
3. Part of the permanent magnet rotor, using environmentally friendly materials, low noise (less than 35 decibels), low power consumption, small size and high efficiency pump body;
4. All the parameters required can be adjusted by the stator winding and can be operated in wide voltage, for example, 6. It can modulate 1M 12V elevators and also 1.8M elevators;
5.Pump suction cup fixing base
Feature
1. High-performance and durable stainless steel shaft, the shaft sleeve magnet is connected into a whole by injection molding to avoid wear and tear and greatly improve the life (up to 10 years without maintenance);
2. The stator part is completely isolated from the rotor part of the pump, the stator and circuit board parts are epoxy potted, 100% waterproof; 2 Can use water and land!
3. Part of the permanent magnet rotor, using environmentally friendly materials, low noise (less than 35 decibels), low power consumption, small size and high efficiency pump body;
4. All the parameters required can be adjusted by the stator winding and can be operated in wide voltage, for example, 6. It can modulate 1M 12V elevators and also 1.8M elevators;
5.Pump suction cup fixing base
Specification
Model DC-1020
Person in charge: 150CM
Flow: 200L/H
Power: 1-3W
Voltage: 12V
Wire source: 1.5M
Size: 39*38*28mm
Model DC-1020
Person in charge: 150CM
Flow: 200L/H
Power: 1-3W
Voltage: 12V
Wire source: 1.5M
Size: 39*38*28mm
DC 24V 3W Solar Pump
Feature
1. Using high-quality materials, the quality is guaranteed
2. The electronic components are used for commutation, and there is no need to use carbon brushes for commutation
3. High-performance wear-resistant stainless steel shaft is used, and the shaft sleeve is integrated with the magnet through injection molding to avoid wear and tear, and the service life is greatly enhanced (up to 10 years without maintenance)
4. The stator part and rotor part of the water pump are completely isolated, and the stator and circuit board parts are encapsulated with epoxy resin, which is 100% waterproof; it can be used for both land and water!
5. The rotor part adopts permanent magnet, the water pump body adopts environmental protection material, low noise (less than 35dB), small size, high efficiency and low power consumption;
6. Various required parameters can be adjusted through the winding of the stator, and it can be operated with a wide voltage. For example, 12V can modulate 1M head, or 1.8M head;
Feature
1. Using high-quality materials, the quality is guaranteed
2. The electronic components are used for commutation, and there is no need to use carbon brushes for commutation
3. High-performance wear-resistant stainless steel shaft is used, and the shaft sleeve is integrated with the magnet through injection molding to avoid wear and tear, and the service life is greatly enhanced (up to 10 years without maintenance)
4. The stator part and rotor part of the water pump are completely isolated, and the stator and circuit board parts are encapsulated with epoxy resin, which is 100% waterproof; it can be used for both land and water!
5. The rotor part adopts permanent magnet, the water pump body adopts environmental protection material, low noise (less than 35dB), small size, high efficiency and low power consumption;
6. Various required parameters can be adjusted through the winding of the stator, and it can be operated with a wide voltage. For example, 12V can modulate 1M head, or 1.8M head;
Specification
Voltage frequency: DC12V~24V
Power: 3W
Lift: 1.5 meters
Flow: 200L/H
Outlet diameter: about 8mm outer diameter
Line length: 1.5 meters
Voltage frequency: DC12V~24V
Power: 3W
Lift: 1.5 meters
Flow: 200L/H
Outlet diameter: about 8mm outer diameter
Line length: 1.5 meters
Instructions for use:
1. Overpressure operation is strictly prohibited. It is strictly forbidden to exceed their respective maximum voltages. If the battery is fully charged, if there is no voltage limiting measure, it will cause serious overvoltage. If you cannot guarantee your own power supply voltage, please test it first.
2. Do not use AC power supply, router power supply, computer cat power supply and many other similar ones are AC and cannot be used!
3. Ripple problem (the most prone to problems): Many DC transformers are half-wave rectifiers. As a result, a lot of AC components are mixed in the DC, and the water pump will be broken! Brushless water pumps must be full wave rectified!
4. Lift problem: For example, the lift of 2.2 meters does not mean that the power can be sprayed to a height of 2.2 meters. The lift refers to the vertical height of the water column in the water pipe after the nozzle is connected to the water pipe. The injection height is much lower than the lift!
1. Overpressure operation is strictly prohibited. It is strictly forbidden to exceed their respective maximum voltages. If the battery is fully charged, if there is no voltage limiting measure, it will cause serious overvoltage. If you cannot guarantee your own power supply voltage, please test it first.
2. Do not use AC power supply, router power supply, computer cat power supply and many other similar ones are AC and cannot be used!
3. Ripple problem (the most prone to problems): Many DC transformers are half-wave rectifiers. As a result, a lot of AC components are mixed in the DC, and the water pump will be broken! Brushless water pumps must be full wave rectified!
4. Lift problem: For example, the lift of 2.2 meters does not mean that the power can be sprayed to a height of 2.2 meters. The lift refers to the vertical height of the water column in the water pipe after the nozzle is connected to the water pipe. The injection height is much lower than the lift!
List
1 x Water Pump
1 x Water Pump
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.